348b5fc778
New firmware/esp32p4-sensor-node/ ESP-IDF (C, FreeRTOS) project skeleton per docs/superpowers/specs/2026-07-23-esp32-sensor-node-design.md's Workstream I: - Wi-Fi station-mode connect with exponential-backoff reconnect (wifi_manager.c), credentials from a gitignored main/device_config.h the seeker fills in (template: device_config.h.example). - Telemetry HTTP client (telemetry_client.c) POSTing the spec's exact contract shape to /api/device/telemetry with a Bearer token, via esp_http_client + cJSON. - BME280 I2C driver (bme280.c) with Bosch's public double-precision compensation formulas, using ESP-IDF's newer driver/i2c_master.h API. - LD2410 mmWave presence driver (ld2410.c) over UART, chosen over a plain PIR for its distance/motion data richness — its frame-offset parsing is flagged as the least-certain code in the firmware. - sensor_driver_t registry (sensor_driver.h, sensor_registry.c) so new sensors are a new driver file + one array line, no main-loop changes. - README.md: build steps, manual-config walkthrough, wiring/pinouts, and an explicit "what's verified vs. not" section plus a real hardware caveat (ESP32-P4 has no integrated Wi-Fi radio). UNVERIFIED AGAINST REAL HARDWARE per the spec's honesty-policy note — no ESP-IDF toolchain or physical boards available in this environment. Syntax-checked with gcc against hand-written ESP-IDF API stubs (not committed) as a best-effort substitute for a real idf.py build. Workstream J (RTL-SDR experimental module) is explicitly out of scope here; firmware/esp32p4-sensor-node/components/ is left in place for it. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
components/
Reserved for the RTL-SDR experimental module (Workstream J in
docs/superpowers/specs/2026-07-23-esp32-sensor-node-design.md) — USB-host
communication with an RTL2832U-based dongle via the ESP32-P4's USB-OTG host
capability, as either a dedicated ESP-IDF component here or a single
main/rtlsdr_experimental.c.
Deliberately empty as of Workstream I (this directory's sibling main/
component covers the core sensor node only — WiFi, telemetry HTTP client,
BME280, LD2410). Not implemented here; out of scope for Workstream I.