ESP32-P4-NANO Network Auditing Tool

A portable network auditing and diagnostic tool built on the ESP32-P4-NANO development board.

Hardware Setup

Setup Environment:
- Open a PowerShell terminal.
- Run the following command to set up the ESP-IDF environment:
```
. .\esp-idf\export.ps1
```

Insert SD Card:

Insert a formatted microSD card with the following structure:

/sdcard
├── config/
│   ├── network_config.json
│   └── mac_vendors.csv
├── logs/
├── scripts/
└── www/
    └── index.html

Build and Flash:
- Build the project:
```
idf.py build
```
- Flash the firmware:
```
idf.py -p (PORT) flash
```
  Replace (PORT) with the serial port of your ESP32-P4-NANO board.
Connect to Target Network:
- Connect the ESP32-P4-NANO to the target network via Ethernet.
Connect to Wi-Fi AP:
- Connect to the Wi-Fi Access Point:
  - SSID: audit-tool (configurable)
  - Password: esp12345 (configurable)
Access Web Interface:
- Open a web browser and navigate to:
  - URL: http://192.168.4.1
  - Default login: admin/admin123

All settings can be configured via sdcard/config/network_config.json:

Ethernet Network Scanning:
- ARP Scan
- TCP Port Scan
- ICMP Ping Sweep
Wi-Fi AP for Control Interface:
- Uses ESP-Hosted-FG solution with the onboard ESP32-C6.
Web Dashboard:
- Real-time status updates.
- Control and monitor scans.
SD Card Logging:
- Logs scan results and system events.
OTA Updates:
- Update the firmware over the air.
Status LED Indicators:
- Visual feedback for system status.

Task stack sizes:

No Ethernet Connection:
- Check the Ethernet cable.
- Verify the PHY pin connections in include/network_manager.h.
- Check the link LED on the Ethernet port.
No Wi-Fi AP:
- Check the sdcard/config/network_config.json file.
- Verify the ESP-Hosted-FG component is correctly configured.
Web Server Issues:
- Verify the SD card is inserted and has the correct file structure.
- Check the file permissions on the SD card.
- Confirm you are connected to the correct Wi-Fi AP and using the correct IP address.