0e4865a7c3
Firmware: - logLine now prepends [HH:MM:SS] timestamp to every log entry - hopCount1/hopCount2 track total frequency hops since boot (exposed in telemetry) - minFreeHeap tracks lowest free heap ever seen (exposed in telemetry) - Heartbeat block: updates minFreeHeap, reboots if heap < 15 KB, warns if temp > 75C (once/min) - Telemetry JSON: added hop_count1, hop_count2, min_heap, ap_clients fields - Removed noisy [HTTP] GET / log line that filled the 100-line ring buffer in ~2 minutes - Log poll reduced to every 5 seconds (telemetry still every 1s) to ease HTTP load UI: - Canvas height 90px with fading heat trail (last 50 hop positions as glowing blur) - Known fob frequencies drawn as labeled dashed vertical lines on each canvas (Honda 303.825, Chmb 310, Toyota 314.98, Ford/GM 315, Linear 318, LiftMaster 390, Holtek 418, Somfy 433.42, EU 433.92, Nero 434.42) - Frequency axis labels embedded inside canvas bottom bar - 2-minute temperature sparkline + heap sparkline (120-sample ring buffer) - 24h mission progress bar under header with elapsed/total display - 12 metrics: added Hops R1, Hops R2, Hops/sec, Min Heap, AP Clients - Color-coded temp (yellow >65C, red >80C) and heap (yellow <60kB, red <30kB) - Pulsing green glow animation on JAMMING ACTIVE banner - Updated input defaults to match config (dwell=5, steps=25/47, span=20/46) Made-with: Cursor
25 lines
475 B
C++
25 lines
475 B
C++
/**
|
|
* Minimal test to verify ESP32-S3 boots
|
|
*/
|
|
#include <Arduino.h>
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
delay(100);
|
|
|
|
Serial.println("=== MINIMAL BOOT TEST ===");
|
|
Serial.println("ESP32-S3 DevKitC-1");
|
|
Serial.println("Built: " __DATE__ " " __TIME__);
|
|
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
|
}
|
|
|
|
void loop() {
|
|
digitalWrite(LED_BUILTIN, HIGH);
|
|
Serial.println("LED ON");
|
|
delay(500);
|
|
|
|
digitalWrite(LED_BUILTIN, LOW);
|
|
Serial.println("LED OFF");
|
|
delay(500);
|
|
} |