#include "Arduino.h"
#include "Audio.h"
#include "WiFi.h"
#include "es8311.h"
#include "Wire.h"

// Pins: Waveshare ESP32-P4-Module-DEV-KIT and ESP32-P4-NANO High-performance Development Board
#define I2S_DOUT       9 // DSDIN pin(es8311)
#define I2S_BCLK      12 // SCLK
#define I2S_MCLK      13
#define I2S_LRC       10 // LRCK
#define I2C_SCL        8
#define I2C_SDA        7
#define PA_ENABLE     53

Audio audio;
ES8311 es;

String ssid =     "*****";
String password = "*****";


void my_audio_info(Audio::msg_t m) {
    Serial.printf("%s: %s\n", m.s, m.msg);
}

void setup() {
    Audio::audio_info_callback = my_audio_info;
    Serial.begin(115200);
    Serial.print("\n\n");
    Serial.println("----------------------------------");
    Serial.printf("ESP32 Chip: %s\n", ESP.getChipModel());
    Serial.printf("Arduino Version: %d.%d.%d\n", ESP_ARDUINO_VERSION_MAJOR, ESP_ARDUINO_VERSION_MINOR, ESP_ARDUINO_VERSION_PATCH);
    Serial.printf("ESP-IDF Version: %d.%d.%d\n", ESP_IDF_VERSION_MAJOR, ESP_IDF_VERSION_MINOR, ESP_IDF_VERSION_PATCH);
    Serial.printf("ARDUINO_LOOP_STACK_SIZE %d words (32 bit)\n", CONFIG_ARDUINO_LOOP_STACK_SIZE);
    Serial.println("----------------------------------");
    Serial.print("\n\n");

    WiFi.begin(ssid.c_str(), password.c_str());
     while (WiFi.status() != WL_CONNECTED) {delay(1500); Serial.print(".");}

    audio.setPinout(I2S_BCLK, I2S_LRC, I2S_DOUT, I2S_MCLK);
    audio.setVolume(21); // default 0...21

    pinMode(PA_ENABLE, OUTPUT);
    digitalWrite(PA_ENABLE, HIGH);

    if(!es.begin(I2C_SDA, I2C_SCL, 400000)) log_e("ES8311 begin failed");
    es.setVolume(50);
    es.setBitsPerSample(16);

    //    es.setSampleRate(22050);
    //    es.read_all();
    //    audio.connecttohost("http://www.wdr.de/wdrlive/media/einslive.m3u");
   audio.connecttohost("http://stream.antennethueringen.de/live/aac-64/stream.antennethueringen.de/"); // aac

}

void loop() {
    audio.loop();
    vTaskDelay(1);
}