Initial commit with Waveshare ESP32-S3-LCD-1.47 demo files

ESP32-S3-LCD-1.47-Demo/Arduino/examples/LCD_Image/LCD_Image.ino

@@ -0,0 +1,56 @@
+/**
+ ******************************************************************************
+ * @file     LCD_Image.ino
+ * @author   Yongqin Ou
+ * @version  V1.0
+ * @date     2024-10-31
+ * @brief    Setup experiment for SD card, display, and RGB lamp
+ * @license  MIT
+ * @copyright Copyright (c) 2024, Waveshare
+ ******************************************************************************
+ * 
+ * Experiment Objective: Learn how to set up and use SD card for image display and control an RGB lamp.
+ *
+ * Hardware Resources and Pin Assignment: 
+ * 1. SD Card Interface --> As configured in SD_Card.h.
+ * 2. Display Interface --> As configured in Display_ST7789.h.
+ * 3. RGB Lamp Interface --> As configured in RGB_lamp.h.
+ *
+ * Experiment Phenomenon:
+ * 1. Runs tests and initializes SD card, display, and sets backlight.
+ * 2. Continuously loops through images on the SD card and controls the RGB lamp.
+ * 
+ * Notes:
+ * None
+ * 
+ ******************************************************************************
+ * 
+ * Development Platform: ESP32
+ * Support Forum: service.waveshare.com
+ * Company Website: www.waveshare.com
+ *
+ ******************************************************************************
+ */
+
+/*
+   You must copy the PNG File from the SD Card File folder to the SD card and connect the SD card to the device
+*/
+#include "SD_Card.h"
+#include "Display_ST7789.h"
+#include "LCD_Image.h"
+#include "RGB_lamp.h"
+
+void setup()
+{
+  Flash_test();
+  SD_Init();     
+  LCD_Init();
+  Set_Backlight(90);  
+}
+
+void loop()
+{
+  Image_Next_Loop("/",".png",300);
+  RGB_Lamp_Loop(2);
+  delay(5);
+}