# ESP32-CAM Video Streaming for Seeed XIAO ESP32S3 Sense

This project implements a live MJPEG video streaming server on the Seeed XIAO ESP32S3 Sense board with OV3660/OV5640 camera module.

## Features
- Automatic WiFi connection to "thetempleofdoom" network
- Live MJPEG video streaming web server
- Serial debug output at 115200 baud
- Optimized for PSRAM usage

## Hardware Requirements
- Seeed XIAO ESP32S3 Sense board
- OV3660 or OV5640 camera module

## Setup
1. Install required libraries:
   - esp_camera
   - WiFi
2. Configure Arduino IDE:
   - Select "XIAO_ESP32S3" board
   - Enable PSRAM in board settings
3. Upload the sketch

## Usage
1. Power on the device
2. Monitor serial output for connection status and IP address
3. Access the stream at `http://[device-ip]/`

## Configuration
- WiFi credentials can be changed in firmware.ino
- Camera settings can be adjusted in firmware.ino

## Known Issues
- None currently identified

## Future Improvements
- Add WiFi connection timeout
- Implement OTA updates
- Add configuration web interface