chore: import local project into Gitea

README.md

@@ -0,0 +1,39 @@
+# ESP32-CAM Video Streaming for Seeed XIAO ESP32S3 Sense
+
+This project implements a live MJPEG video streaming server on the Seeed XIAO ESP32S3 Sense board with OV3660/OV5640 camera module.
+
+## Features
+- Automatic WiFi connection to "thetempleofdoom" network
+- Live MJPEG video streaming web server
+- Serial debug output at 115200 baud
+- Optimized for PSRAM usage
+
+## Hardware Requirements
+- Seeed XIAO ESP32S3 Sense board
+- OV3660 or OV5640 camera module
+
+## Setup
+1. Install required libraries:
+   - esp_camera
+   - WiFi
+2. Configure Arduino IDE:
+   - Select "XIAO_ESP32S3" board
+   - Enable PSRAM in board settings
+3. Upload the sketch
+
+## Usage
+1. Power on the device
+2. Monitor serial output for connection status and IP address
+3. Access the stream at `http://[device-ip]/`
+
+## Configuration
+- WiFi credentials can be changed in firmware.ino
+- Camera settings can be adjusted in firmware.ino
+
+## Known Issues
+- None currently identified
+
+## Future Improvements
+- Add WiFi connection timeout
+- Implement OTA updates
+- Add configuration web interface