menu "RTL-SDR Experimental Module (Workstream J — UNVERIFIED)"

    config RTLSDR_EXP_ENABLE
        bool "Enable RTL-SDR experimental USB-host module"
        default n
        help
            Attempts to initialize the ESP32-P4 USB Host Library and probe
            for an attached RTL2832U-based dongle. This module is
            experimental and UNVERIFIED against real hardware — see
            firmware/esp32p4-sensor-node/README.md, "Workstream J" section,
            before enabling on a device you care about. Off by default so
            it can never interfere with the core sensor node build unless
            explicitly turned on.

    config RTLSDR_EXP_BULK_CHUNK_BYTES
        int "Bulk IQ read chunk size (bytes, must be a multiple of 512)"
        default 16384
        depends on RTLSDR_EXP_ENABLE
        help
            UNVERIFIED default. Real achievable USB bulk throughput on
            ESP32-P4 (and the right tradeoff against available heap/DMA
            memory) is one of the concrete things a real hardware bring-up
            session needs to measure and tune.

    config RTLSDR_EXP_BULK_QUEUE_DEPTH
        int "In-flight bulk transfer pipeline depth"
        default 4
        range 1 8
        depends on RTLSDR_EXP_ENABLE
        help
            Number of bulk-IN transfers kept perpetually submitted so the
            USB pipe doesn't idle. UNVERIFIED — needs tuning against real
            measured throughput vs. available RAM.

endmenu