feat(firmware): ESP32-P4 sensor node — Workstream I core skeleton

New firmware/esp32p4-sensor-node/ ESP-IDF (C, FreeRTOS) project skeleton
per docs/superpowers/specs/2026-07-23-esp32-sensor-node-design.md's
Workstream I:

- Wi-Fi station-mode connect with exponential-backoff reconnect
  (wifi_manager.c), credentials from a gitignored main/device_config.h
  the seeker fills in (template: device_config.h.example).
- Telemetry HTTP client (telemetry_client.c) POSTing the spec's exact
  contract shape to /api/device/telemetry with a Bearer token, via
  esp_http_client + cJSON.
- BME280 I2C driver (bme280.c) with Bosch's public double-precision
  compensation formulas, using ESP-IDF's newer driver/i2c_master.h API.
- LD2410 mmWave presence driver (ld2410.c) over UART, chosen over a
  plain PIR for its distance/motion data richness — its frame-offset
  parsing is flagged as the least-certain code in the firmware.
- sensor_driver_t registry (sensor_driver.h, sensor_registry.c) so new
  sensors are a new driver file + one array line, no main-loop changes.
- README.md: build steps, manual-config walkthrough, wiring/pinouts,
  and an explicit "what's verified vs. not" section plus a real
  hardware caveat (ESP32-P4 has no integrated Wi-Fi radio).

UNVERIFIED AGAINST REAL HARDWARE per the spec's honesty-policy note —
no ESP-IDF toolchain or physical boards available in this environment.
Syntax-checked with gcc against hand-written ESP-IDF API stubs (not
committed) as a best-effort substitute for a real idf.py build.

Workstream J (RTL-SDR experimental module) is explicitly out of scope
here; firmware/esp32p4-sensor-node/components/ is left in place for it.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

firmware/esp32p4-sensor-node/CMakeLists.txt

@@ -0,0 +1,16 @@
+# Quantumancy ESP32-P4 Sensor Node — top-level ESP-IDF project file.
+#
+# Standard ESP-IDF project layout: this file just pulls in the IDF build
+# system and declares the project; all real component logic lives under
+# main/ (and, for the experimental RTL-SDR stretch goal, components/).
+#
+# Build with (ESP-IDF v5.3+ toolchain required for esp32p4 target support):
+#   idf.py set-target esp32p4
+#   idf.py build
+#
+# UNVERIFIED AGAINST REAL HARDWARE — see README.md's honesty-policy section.
+cmake_minimum_required(VERSION 3.16)
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+
+project(esp32p4_sensor_node)