diff --git a/voice_assistant/voice_assistant.ino b/voice_assistant/voice_assistant.ino
index 025db02..5aed1a3 100644
--- a/voice_assistant/voice_assistant.ino
+++ b/voice_assistant/voice_assistant.ino
@@ -1,148 +1,148 @@
-// Include necessary libraries
-#include <WiFi.h>
-#include <HTTPClient.h>
-#include <ArduinoJson.h>
-#include <Adafruit_GFX.h>
-#include <Adafruit_ILI9341.h>
-
-// WiFi credentials
-const char* ssid = "thetempleofdoom";
-const char* password = "myhandsonmyself";
-
-// Gemini API key
-const char* geminiApiKey = "AIzaSyAzFzg_MAcwoH3O-nfriBjlFw5x6UBU5hk";
-
-// Pin for the button
-// IMPORTANT: Please verify the pin number for your button and update the value below.
-const int buttonPin = 0; 
-
-// Display pins
-// IMPORTANT: Please verify the pin numbers for your display and update the values below.
-#define TFT_CS   5
-#define TFT_DC   4
-#define TFT_RST  -1 // Reset pin (often not needed)
-
-Adafruit_ILI9341 tft = Adafruit_ILI9341(TFT_CS, TFT_DC, TFT_RST);
-
-void setup() {
-  // Initialize serial communication
-  Serial.begin(115200);
-
-  // Initialize the button pin
-  pinMode(buttonPin, INPUT_PULLUP);
-
-  // Connect to WiFi
-  WiFi.begin(ssid, password);
-  while (WiFi.status() != WL_CONNECTED) {
-    delay(1000);
-    Serial.println("Connecting to WiFi...");
-  }
-  Serial.println("Connected to WiFi");
-  Serial.print("IP Address: ");
-  Serial.println(WiFi.localIP());
-
-  // Initialize the display
-  tft.begin();
-  tft.setRotation(3);
-  tft.fillScreen(ILI9341_BLACK);
-  tft.setTextColor(ILI9341_GREEN);
-  tft.setTextSize(2);
-  tft.println("Hacker Voice Assistant");
-  tft.println("--------------------");
-  tft.setTextSize(1);
-  tft.print("IP: ");
-  tft.println(WiFi.localIP());
-  tft.setTextSize(2);
-  tft.println("\nReady for command...");
-}
-
-void loop() {
-  // Check if the button is pressed
-  if (digitalRead(buttonPin) == LOW) {
-    // Start a voice session
-    startVoiceSession();
-    // After the session, clear the screen and show the ready message again
-    tft.fillScreen(ILI9341_BLACK);
-    tft.setCursor(0,0);
-    tft.setTextSize(2);
-    tft.println("Hacker Voice Assistant");
-    tft.println("--------------------");
-    tft.setTextSize(1);
-    tft.print("IP: ");
-    tft.println(WiFi.localIP());
-    tft.setTextSize(2);
-    tft.println("\nReady for command...");
-  }
-}
-
-void startVoiceSession() {
-  // Clear the screen for the new session
-  tft.fillScreen(ILI9341_BLACK);
-  tft.setCursor(0,0);
-  tft.setTextSize(2);
-
-  // TODO: Add voice recording and processing code here
-  Serial.println("Button pressed, starting voice session...");
-  displayHackerText("Listening...");
-
-  // For now, we'll just send a test query to Gemini
-  delay(2000); // Simulate recording time
-  displayHackerText("Processing...");
-  String query = "Hello, Gemini!";
-  String response = sendToGemini(query);
-
-  // Display the response
-  displayHackerText("User: " + query);
-  displayHackerText("Gemini: " + response);
-  Serial.println("Gemini response: " + response);
-}
-
-String sendToGemini(String query) {
-  HTTPClient http;
-  String url = "https://generativelanguage.googleapis.com/v1beta/models/gemini-pro:generateContent?key=";
-  url += geminiApiKey;
-
-  http.begin(url);
-  http.addHeader("Content-Type", "application/json");
-
-  StaticJsonDocument<200> doc;
-  JsonObject content = doc.createNestedObject("contents");
-  JsonArray parts = content.createNestedArray("parts");
-  JsonObject part = parts.createNestedObject();
-  part["text"] = query;
-
-  String requestBody;
-  serializeJson(doc, requestBody);
-
-  int httpResponseCode = http.POST(requestBody);
-
-  if (httpResponseCode > 0) {
-    String payload = http.getString();
-    StaticJsonDocument<1024> responseDoc;
-    DeserializationError error = deserializeJson(responseDoc, payload);
-
-    if (error) {
-      Serial.print(F("deserializeJson() failed: "));
-      Serial.println(error.f_str());
-      return "Error: Failed to parse response.";
-    }
-
-    if (responseDoc.containsKey("candidates")) {
-      const char* responseText = responseDoc["candidates"][0]["content"]["parts"][0]["text"];
-      return String(responseText);
-    } else {
-      return "Error: Invalid response from Gemini.";
-    }
-  } else {
-    Serial.print("Error on sending POST: ");
-    Serial.println(httpResponseCode);
-    return "Error: Unable to get response from Gemini.";
-  }
-
-  http.end();
-  return "";
-}
-
-void displayHackerText(String text) {
-  tft.println(text);
-}
+// Include necessary libraries
+#include <WiFi.h>
+#include <HTTPClient.h>
+#include <ArduinoJson.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_ILI9341.h>
+
+// WiFi credentials
+const char* ssid = "REPLACE_WITH_WIFI_SSID";
+const char* password = "REPLACE_WITH_WIFI_PASSWORD";
+
+// Gemini API key
+const char* geminiApiKey = "REPLACE_WITH_GOOGLE_API_KEY";
+
+// Pin for the button
+// IMPORTANT: Please verify the pin number for your button and update the value below.
+const int buttonPin = 0;
+
+// Display pins
+// IMPORTANT: Please verify the pin numbers for your display and update the values below.
+#define TFT_CS   5
+#define TFT_DC   4
+#define TFT_RST  -1 // Reset pin (often not needed)
+
+Adafruit_ILI9341 tft = Adafruit_ILI9341(TFT_CS, TFT_DC, TFT_RST);
+
+void setup() {
+  // Initialize serial communication
+  Serial.begin(115200);
+
+  // Initialize the button pin
+  pinMode(buttonPin, INPUT_PULLUP);
+
+  // Connect to WiFi
+  WiFi.begin(ssid, password);
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(1000);
+    Serial.println("Connecting to WiFi...");
+  }
+  Serial.println("Connected to WiFi");
+  Serial.print("IP Address: ");
+  Serial.println(WiFi.localIP());
+
+  // Initialize the display
+  tft.begin();
+  tft.setRotation(3);
+  tft.fillScreen(ILI9341_BLACK);
+  tft.setTextColor(ILI9341_GREEN);
+  tft.setTextSize(2);
+  tft.println("Hacker Voice Assistant");
+  tft.println("--------------------");
+  tft.setTextSize(1);
+  tft.print("IP: ");
+  tft.println(WiFi.localIP());
+  tft.setTextSize(2);
+  tft.println("\nReady for command...");
+}
+
+void loop() {
+  // Check if the button is pressed
+  if (digitalRead(buttonPin) == LOW) {
+    // Start a voice session
+    startVoiceSession();
+    // After the session, clear the screen and show the ready message again
+    tft.fillScreen(ILI9341_BLACK);
+    tft.setCursor(0,0);
+    tft.setTextSize(2);
+    tft.println("Hacker Voice Assistant");
+    tft.println("--------------------");
+    tft.setTextSize(1);
+    tft.print("IP: ");
+    tft.println(WiFi.localIP());
+    tft.setTextSize(2);
+    tft.println("\nReady for command...");
+  }
+}
+
+void startVoiceSession() {
+  // Clear the screen for the new session
+  tft.fillScreen(ILI9341_BLACK);
+  tft.setCursor(0,0);
+  tft.setTextSize(2);
+
+  // TODO: Add voice recording and processing code here
+  Serial.println("Button pressed, starting voice session...");
+  displayHackerText("Listening...");
+
+  // For now, we'll just send a test query to Gemini
+  delay(2000); // Simulate recording time
+  displayHackerText("Processing...");
+  String query = "Hello, Gemini!";
+  String response = sendToGemini(query);
+
+  // Display the response
+  displayHackerText("User: " + query);
+  displayHackerText("Gemini: " + response);
+  Serial.println("Gemini response: " + response);
+}
+
+String sendToGemini(String query) {
+  HTTPClient http;
+  String url = "https://generativelanguage.googleapis.com/v1beta/models/gemini-pro:generateContent?key=";
+  url += geminiApiKey;
+
+  http.begin(url);
+  http.addHeader("Content-Type", "application/json");
+
+  StaticJsonDocument<200> doc;
+  JsonObject content = doc.createNestedObject("contents");
+  JsonArray parts = content.createNestedArray("parts");
+  JsonObject part = parts.createNestedObject();
+  part["text"] = query;
+
+  String requestBody;
+  serializeJson(doc, requestBody);
+
+  int httpResponseCode = http.POST(requestBody);
+
+  if (httpResponseCode > 0) {
+    String payload = http.getString();
+    StaticJsonDocument<1024> responseDoc;
+    DeserializationError error = deserializeJson(responseDoc, payload);
+
+    if (error) {
+      Serial.print(F("deserializeJson() failed: "));
+      Serial.println(error.f_str());
+      return "Error: Failed to parse response.";
+    }
+
+    if (responseDoc.containsKey("candidates")) {
+      const char* responseText = responseDoc["candidates"][0]["content"]["parts"][0]["text"];
+      return String(responseText);
+    } else {
+      return "Error: Invalid response from Gemini.";
+    }
+  } else {
+    Serial.print("Error on sending POST: ");
+    Serial.println(httpResponseCode);
+    return "Error: Unable to get response from Gemini.";
+  }
+
+  http.end();
+  return "";
+}
+
+void displayHackerText(String text) {
+  tft.println(text);
+}