#ifndef CONFIG_H
#define CONFIG_H

// CC1101 #1 (315 MHz band)
#define CC1101_1_CS   7
#define CC1101_1_GDO0 4
#define CC1101_1_FREQ_MHZ 315.0f

// CC1101 #2 (433.92 MHz band)
#define CC1101_2_CS   8
#define CC1101_2_GDO0 5
#define CC1101_2_FREQ_MHZ 433.92f

// Shared SPI (FSPI default on ESP32-S3: 11=MOSI, 12=SCK, 13=MISO)
#define SPI_SCK_PIN 12
#define SPI_MISO_PIN 13
#define SPI_MOSI_PIN 11
#define SPI_SPEED_HZ 500000

// WiFi AP for read-only telemetry UI
#define WIFI_AP_SSID "killer"
#define WIFI_AP_PASS "password"   // simple demo password

// Web server
#define WEB_PORT 80

// Jamming configuration
#define JAMMING_ENABLED true           // Start jamming immediately on boot
// CC1101 only accepts 8 discrete power levels (index 0-7):
// { -30, -20, -15, -10, 0, 5, 7, 10 } dBm
#define JAM_POWER_LEVELS   8
#define DEFAULT_JAM_POWER_IDX 7        // index into power table (7 = 10 dBm, max)
#define JAM_NOISE_PATTERN_LEN 64

// Modulation parameters for jamming
#define JAM_BITRATE_KBPS 250.0f        // High bitrate = wider noise bandwidth
#define JAM_FREQ_DEV_KHZ 120.0f        // Wide deviation = covers ~240 kHz per hop
#define JAM_RX_BW_KHZ 812.0f           // Maximum RX BW

// Frequency sweep — each radio hops across its ISM band
// 315 MHz band: 314.0 – 316.0 MHz  (US key fobs cluster here)
#define SWEEP_1_CENTER_MHZ  315.0f
#define SWEEP_1_SPAN_MHZ    1.0f       // ±0.5 MHz around center
#define SWEEP_1_STEPS       5          // number of hop points

// 433 MHz band: 433.05 – 434.79 MHz (EU/global key fobs)
#define SWEEP_2_CENTER_MHZ  433.92f
#define SWEEP_2_SPAN_MHZ    1.0f
#define SWEEP_2_STEPS       5

// How long to dwell on each hop frequency (ms)
#define SWEEP_DWELL_MS      8

#endif