Initial commit: project docs and ignore rules

ESP32-C5-Toolkit/main/board_config.h

@@ -0,0 +1,62 @@
+#ifndef BOARD_CONFIG_H
+#define BOARD_CONFIG_H
+
+#include "sdkconfig.h"
+
+/**
+ * @file board_config.h
+ * @brief Configuration for ESP32-C5 boards
+ * 
+ * This file contains hardware-specific settings for different ESP32-C5 boards.
+ * Adjust these settings to match your specific board configuration.
+ */
+
+/*
+ * Basic pin mapping for ESP32-C5
+ * 
+ * ESP32-C5 pin mapping based on the official ESP32-C5-DevKitC-1 but designed
+ * to be compatible with generic ESP32-C5 boards. GPIO pins are mapped
+ * according to common ESP32-C5 dev boards, but can be adjusted as needed.
+ */
+
+// GPIO pins (use -1 if not available on your board)
+#define GPIO_BUTTON                  0   // Boot button (GPIO0 on most ESP32-C5 boards)
+
+// UART pins - Usually these are fixed for ESP32-C5
+#define GPIO_UART_TX                 11  // UART TX (GPIO11 on ESP32-C5)
+#define GPIO_UART_RX                 12  // UART RX (GPIO12 on ESP32-C5)
+
+// WiFi antenna configuration
+// This is the default if no setting is found in NVS
+// Set to 1 to use external antenna, 0 for internal antenna
+#define USE_EXTERNAL_ANTENNA         0
+
+// Board identification 
+// Enable the appropriate board or define your own
+#define BOARD_ESP32_C5_DEVKITC       1   // Official ESP32-C5-DevKitC 
+#define BOARD_ESP32_C5_GENERIC       0   // Generic ESP32-C5 board
+
+// Advanced settings
+// Default channel for WiFi AP mode
+#define DEFAULT_WIFI_CHANNEL         1
+
+// Advanced WiFi settings - may need adjustment for different boards
+#define WIFI_COUNTRY_POLICY WIFI_COUNTRY_POLICY_AUTO
+#define WIFI_COUNTRY_CODE "US"  // Change according to your region
+
+/**
+ * Board-specific initializations
+ * Enable or customize based on your specific board
+ */
+#if BOARD_ESP32_C5_DEVKITC
+    // Settings specific to the official DevKitC
+    #define BOARD_NAME "ESP32-C5-DevKitC"
+#elif BOARD_ESP32_C5_GENERIC
+    // Generic board settings
+    #define BOARD_NAME "ESP32-C5-Generic"
+#else
+    // Default fallback
+    #define BOARD_NAME "ESP32-C5"
+#endif
+
+#endif /* BOARD_CONFIG_H */