Initial commit: project docs and ignore rules

ESP32-C5-Toolkit/build_and_flash.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# Build and Flash Script for ESP32-C5 Toolkit
+
+set -e
+
+echo "========================================"
+echo "ESP32-C5 Toolkit - Build and Flash"
+echo "========================================"
+echo ""
+
+# Check if IDF_PATH is set
+if [ -z "$IDF_PATH" ]; then
+    echo "❌ ERROR: ESP-IDF environment not set!"
+    echo ""
+    echo "Please source ESP-IDF first:"
+    echo "  source \$IDF_PATH/export.sh"
+    echo ""
+    echo "Or if ESP-IDF is installed elsewhere:"
+    echo "  source ~/esp/esp-idf/export.sh"
+    echo ""
+    exit 1
+fi
+
+echo "✓ ESP-IDF found at: $IDF_PATH"
+echo ""
+
+# Get the directory where this script is located
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+cd "$SCRIPT_DIR"
+
+# Set target (ESP32-C5)
+echo "Setting target to ESP32-C5..."
+idf.py --preview set-target esp32c5
+
+echo ""
+echo "Building firmware..."
+idf.py build
+
+if [ $? -eq 0 ]; then
+    echo ""
+    echo "✓ Build successful!"
+    echo ""
+    
+    # Check if port is provided as argument
+    if [ -n "$1" ]; then
+        PORT="$1"
+        echo "Flashing to port: $PORT"
+        echo ""
+        idf.py -p "$PORT" flash monitor
+    else
+        echo "To flash and monitor, run:"
+        echo "  idf.py -p [PORT] flash monitor"
+        echo ""
+        echo "Example:"
+        echo "  idf.py -p /dev/cu.usbserial-* flash monitor"
+        echo ""
+        echo "Or use this script with port:"
+        echo "  ./build_and_flash.sh /dev/cu.usbserial-*"
+    fi
+else
+    echo ""
+    echo "❌ Build failed!"
+    exit 1
+fi
+